Citation: | HUANG Wan-fu, YUAN Yuan-ping. The Practice of Reduing the Sulfur Loss in Sulfur Concentrate Thickener in the Mineral Processing Factory of Yong Ping Copper Mine[J]. Nonferrous Metals Science and Engineering, 2006, 9(3): 24-26. |
[1] |
周少珍, 吴国霞.浮选硫精矿浓密机溢流水跑浑的治理实践[J].有色金属:选矿部分, 2001, (4):38-41. http://d.wanfangdata.com.cn/Periodical/ysjs-xk200104011
|
[2] |
胡凤清, 周高云, 段福成, 等.锌精矿浓密机溢流跑浑的治理实践[J].有色金属:选矿部分, 2003, (1):34-36. http://www.docin.com/p-539123573.html
|
[3] |
张天永, 刘沈宁.浓密机使用故障分析及对策[J].有色冶炼, 2002, 31(1):23-25. doi: 10.3969/j.issn.1672-6103.2002.01.009
|
[4] |
王跃钢.传统NT-30浓密机改造[J].湖南有色金属, 2003, 19(6):52-53. http://www.doc88.com/p-1384327908676.html
|
[5] |
王卫, 谭建平.深锥浓密机刮泥功率的确定及絮凝沉降实验研究[J].矿冶工程, 2004, 24(1):44-46. http://www.wenkuxiazai.com/doc/48457504b7360b4c2e3f64ce.html
|
[6] |
张仁高, 钟立军. NE-20M浓密机的改造[J].矿山机械, 2003, 31(3):66-67. http://www.wenkuxiazai.com/doc/3fb41fc7cfc789eb162dc8a7.html
|
[7] |
赵影.采用絮凝法改变矿物沉降模式的研究与实践[J].甘肃冶金, 2003, 25(B12):45-47. http://www.cqvip.com/QK/92054X/2003B12/9013050.html
|
[1] | Li Xueshuai, Guo Lili, Zhang Jianbo, Wang Haibin, Zheng Dianshui. Anisotropy and texture correlation analysis of deep-drawing copper strip[J]. Nonferrous Metals Science and Engineering, 2020, 11(4): 44-48. DOI: 10.13264/j.cnki.ysjskx.2020.04.007 |
[2] | Zhang Ying, Zhang Ting-an. Research progress for vanadium extraction from vanadium leach solution by solvent extraction[J]. Nonferrous Metals Science and Engineering, 2017, 8(5): 14-20. DOI: 10.13264/j.cnki.ysjskx.2017.05.002 |
[3] | WANG Fang, Zhao Hongxing, XIAO Yanfei, XU Zhifeng. Solvent extraction of thioarsenite by CO32--type tOMAC in alkaline solutions[J]. Nonferrous Metals Science and Engineering, 2016, 7(2): 14-18. |
[4] | YANG Ming, WU Di, YE Xinyu, JIAO Yunfen, WU Long, HUANG Xin, LI Qin. Preparation of large particle neodymium oxide by oxalic acid precipitation with stripping solution[J]. Nonferrous Metals Science and Engineering, 2015, 6(1): 106-110. DOI: 10.13264/j.cnki.ysjskx.2015.01.020 |
[5] | LI Bo. Research advances of molybdenum solvent extraction in acidic system[J]. Nonferrous Metals Science and Engineering, 2013, 4(6): 33-36. DOI: 10.13264/j.cnki.ysjskx.2013.06.021 |
[6] | FAN Jin-jun, DENG Sheng-hua, XIE Fang-hao, YANG You-ming. Experiment on Back-extraction of Cr(Ⅲ) in Acidic Extractant by Alkali[J]. Nonferrous Metals Science and Engineering, 2011, 2(4): 97-100. |
[7] | ZHAO Hong-jin, ZHANG Ying-hui, WANG Da, YANG Bin, XU Gao-lei. Production Process of Cu/Al Cladding Strip Used for Cable[J]. Nonferrous Metals Science and Engineering, 2010, 1(01): 15-17, 23. |
[8] | ZHANG Chun-lei, LIU Xue-jun. Application of Global Positioning System in Strip Mine[J]. Nonferrous Metals Science and Engineering, 2008, 22(4): 1-3. |
[9] | DAI Jiang-hong, ZENG Qing-yun, CHEN Qing-gen. Study on Technique of Microwave Extraction for Producing Copper Sulfate from Leaching Solution of Low Grade Copper Ores[J]. Nonferrous Metals Science and Engineering, 2006, 20(2): 23-25. |