Current Issue Cover
Advanced Search
Founded in 1987， Bimonthly
Supervisor：Jiangxi University Of Science And Technology
Sponsored by：Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN：1674-9669
CN：36-1311/TF
CODEN YJKYA9
Volume 1 Issue 01
Oct.  2010
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZHAO Hong-jin, ZHANG Ying-hui, WANG Da, YANG Bin, XU Gao-lei. Production Process of Cu/Al Cladding Strip Used for Cable[J]. Nonferrous Metals Science and Engineering, 2010, 1(01): 15-17, 23.
Citation: ZHAO Hong-jin, ZHANG Ying-hui, WANG Da, YANG Bin, XU Gao-lei. Production Process of Cu/Al Cladding Strip Used for Cable[J]. Nonferrous Metals Science and Engineering, 2010, 1(01): 15-17, 23.
shu

Production Process of Cu/Al Cladding Strip Used for Cable

  • Faculty of Materials and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China

More Information
  • Received Date: May 30, 2010
  • Available Online: February 13, 2022
  • Published Date: October 30, 2010
    Graphical Abstract
    • Abstract
  • This paper studies the production process of copper/aluminum cladding strip used for cable on different cold rolling and annealing process. The results showed that cold rolling rate should larger than 67 %. And the proper annealing process for Cu/Al cladding strip was carried out at 31℃ for 1.5 hours. The mechanism of interface combination was composed by physical combination in cold rolling and metallurgical combination in annealing.
    • FullText(HTML)
    • References (9)
  • [1]
    黄伯云, 李成功, 石力开, 等.中国材料工程大典[M].北京:化工工业出版社, 2006.
    [2]
    王小红, 唐荻, 许荣昌, 等.铝-铜轧制复合工艺及界面结合机理[J].有色金属, 2007, 59(1): 21-24. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=yous200701005&dbname=CJFD&dbcode=CJFQ
    [3]
    黄宏军, 贾真, 袁晓光.铜-铝-铜复合板导电特性的模拟[J].特种铸造及有色合金, 2007, 27(5): 354-356. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=tzzz200705011&dbname=CJFD&dbcode=CJFQ
    [4]
    PENG X K, HENSS G, YEUNG W Y. Effect of Rolling Temperature on Interface and Bond Strength Development of Roll Bonded Cop-per-aluminum Metal laminates[J]. Journal of Materials Science, 1999, 34: 277-281. doi: 10.1023/A:1004497304095
    [5]
    PENG X K. WUHRER R.HENESS G, et al. Rolling Strain Effects on the Inter-laminar Properties of Roll Bonded Copper-Aluminum Metal Laminates[J]. Journal of Materials Science, 2000, 35: 4357-4363. doi: 10.1023/A:1004852806390
    [6]
    PENG X K, WUHRER R, HENESS G, et al. On the Interface Development and Fracture Behaviour of Roll Bonded CopperaluMinum Metal Laminates [J]. Journal of Materials Science, 1999, 34:2029-2038. doi: 10.1023/A:1004543306110
    [7]
    孟亮, 张雷, 周世平, 等.退火工艺对Ag/Cu层复合板分离强度的作用[J].材料热处理学报, 2002, 23(9): 31-33. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=jscl200203007&dbname=CJFD&dbcode=CJFQ
    [8]
    张胜华, 郭祖军.铝/铜轧制复合板的界面结合机制[J].中南工业大学学报, 1995, 26(4): 510-512. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=zngd504.019&dbname=CJFD&dbcode=CJFQ
    [9]
    李民权, 张辉, 李落星.热轧钢/铝复合板结合强度及界面的研究[J].热加工工艺, 2008, 37(24): 34-37. doi: 10.3969/j.issn.1001-3814.2008.24.011
    • Related Articles

  • Related Articles

    [1]WANG Shuhong, CHEN Budong, CAO Feifei, WU Qijun, QIAN Chunbo, XU Feixing, LI Zhongping. Preparation of TiO2/CuS composite materials and their performance in photocatalytic degradation of polluted wastewater[J]. Nonferrous Metals Science and Engineering, 2024, 15(6): 877-889. DOI: 10.13264/j.cnki.ysjskx.2024.06.011
    [2]DU Mingxing, LENG Jinfeng, LI Zhanzhi, YIN Yuhu. Effect of trace Er and Zr addition on mechanical properties of 6082 Al alloy during solid solution-aging treatment[J]. Nonferrous Metals Science and Engineering, 2024, 15(1): 139-146. DOI: 10.13264/j.cnki.ysjskx.2024.01.017
    [3]ZHAO Kui, LIU Weifa, ZENG Peng, ZHANG Liang. Optimization of structural parameters of deep stope based on combination weighting game theory[J]. Nonferrous Metals Science and Engineering, 2018, 9(2): 70-74. DOI: 10.13264/j.cnki.ysjskx.2018.02.012
    [4]WEN Yan, ZHANG Qinying, GUO Shengda, SU Wei, HUANG Zhu, CHEN Hao. SPS sintering process of WC-6Co cemented carbide[J]. Nonferrous Metals Science and Engineering, 2017, 8(3): 74-78. DOI: 10.13264/j.cnki.ysjskx.2017.03.012
    [5]LIN Shipeng, LIU Jinyan, JI Yanli. Research status of CNTs reinforced aluminum matrix composites[J]. Nonferrous Metals Science and Engineering, 2017, 8(2): 57-62. DOI: 10.13264/j.cnki.ysjskx.2017.02.010
    [6]WANG Zhigang, YE Jieyun, QI Liang, ZHANG Yinhui. Effects of cold rolling reduction and annealing temperature on the microstructures and properties of H62 brass[J]. Nonferrous Metals Science and Engineering, 2014, 5(5): 87-91. DOI: 10.13264/j.cnki.ysjskx.2014.05.016
    [7]GUO Xueyi, WANG Qinmeng, LIAO Lile, TIAN Qinghua, ZHANG Yongzhu. Mechanism and multiphase interface behavior of copper sulfide concentrate smelting in oxygen-enriched bottom blowing furnace[J]. Nonferrous Metals Science and Engineering, 2014, 5(5): 28-34. DOI: 10.13264/j.cnki.ysjskx.2014.05.005
    [8]XIONG Li, YE Xue-jun, HU Cheng, LIU Zi-shuai, QIU Zhen-zhong. Sorting effects and mechanism of SA-3 on copper bismuth sulphide[J]. Nonferrous Metals Science and Engineering, 2011, 2(6): 83-85.
    [9]FANG Ling, ZHANG Xiao-lian, WANG Ke-jun. Research Progress of High Volume Fraction SiCp/Al Composites[J]. Nonferrous Metals Science and Engineering, 2007, 21(4): 34-37.
    [10]SONG Yu-chun, XU Lun-hui. The Design of ESP based on USB Interface[J]. Nonferrous Metals Science and Engineering, 2003, 17(1): 44-47.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (91) PDF downloads (6) Cited by()
    Related

    Copyright © 2010 Editorial Department of Nonferrous Metals Science and Engineering All rights reserved

    Address：11th floor, bishop building, University of science and technology, No. 86, Hongqi Avenue, Ganzhou City, Jiangxi Province  Tel：0797-8312555

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return