Current Issue Cover
Advanced Search
Founded in 1987， Bimonthly
Supervisor：Jiangxi University Of Science And Technology
Sponsored by：Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN：1674-9669
CN：36-1311/TF
CODEN YJKYA9
Volume 15 Issue 3
Jun.  2024
Turn off MathJax
Article Contents
Abstract
References
Related Articles
ZONG Lin, ZHAO Hongjin, HU Yujun, ZHANG Bing, XU Xingxing. Effect of two-stage aging process on mechanical properties of QAl9-4 aluminum bronze alloy[J]. Nonferrous Metals Science and Engineering, 2024, 15(3): 392-399. DOI: 10.13264/j.cnki.ysjskx.2024.03.009
Citation: ZONG Lin, ZHAO Hongjin, HU Yujun, ZHANG Bing, XU Xingxing. Effect of two-stage aging process on mechanical properties of QAl9-4 aluminum bronze alloy[J]. Nonferrous Metals Science and Engineering, 2024, 15(3): 392-399. DOI: 10.13264/j.cnki.ysjskx.2024.03.009
shu

Effect of two-stage aging process on mechanical properties of QAl9-4 aluminum bronze alloy

  • 1.

    Faculty of Material Metallurgy and Chemistry, Jiangxi University of Science and Technology, Ganzhou341000, Jiangxi, China

  • 2.

    School of Aeronautical Engineering, Jiangxi Teachers College, Yingtan335000, Jiangxi, China

More Information
  • Received Date: November 27, 2022
  • Revised Date: April 03, 2023
  • Available Online: July 04, 2024
    Graphical Abstract
    • Abstract

  • In this paper, the effects of the aging process on the microstructure and mechanical properties of QAl9-4 aluminum bronze alloy were investigated with orthogonal test. The results show that different process parameters have different effects on alloy properties, with the order of influence degree being second-order aging temperature > first-order aging temperature > first-order aging time > second-order aging time. The variance analysis of orthogonal test results showed that the optimal two-stage aging process was (150 ℃/2 h)+(500 ℃/2.5 h), and the alloy was treated by this process. Compared with the single-stage aging treatment, the compressive strength, ultimate compression ratio, and hardness of the alloy treated by the optimized two-stage aging process are increased by 14.79%, 25.59%, and 5.28%, respectively. Finally, the microstructure characterization was performed on alloys treated under different aging processes. The results reveal that the differences in properties are attributed to the alloys after two-stage aging treatment containing more dispersed enhanced phases and fewer γ2 phases.Therefore, QAl9-4 aluminum bronze alloy can obtain better performance by two-stage aging treatment than that of single-stage aging treatment.

    • FullText(HTML)
    • References (25)
  • [1]
    ZHOU T, LUO Q, LIU L. The growth mechanism of diffused multilayer between electroplated nickel coating and nickel-aluminum bronze alloy[J]. Materials Letters, 2022, 328: 133117.
    [2]
    LI H, LI R Q, YANG F, et al. Friction and wear characteristics of aluminum bronze (QAl10-4-4) bearing materials under high-temperature dry sliding conditions[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42(7): 1-8.
    [3]
    BARR C, PATERAS A, MOLOTNIKOV A, et al. Effect of composition on the tensile and corrosion performance of nickel aluminium bronze produced via laser powder bed fusion[J]. Additive Manufacturing, 2022, 54: 102771.
    [4]
    ZHANG B B, WANG J Z, LIU H, et al. Assessing the tribocorrosion performance of nickel-aluminum bronze in different aqueous environments[J]. Tribology Transactions, 2019, 62(2): 314-323.
    [5]
    吕海波, 刘祥玲, 索忠源, 等. 大功率超声处理对铸态QAl9-4铝青铜组织与性能的影响[J]. 铸造, 2020, 69(11): 1162-1166.
    [6]
    WANG J, DE CASTRO C C, LU X F. The formation mechanisms and improvement measures for penetrating cracks in QAl9-4/Q345B welded joint[J]. Journal of Materials Engineering and Performance, 2020, 29(4): 2346-2354.
    [7]
    YANG F F, KANG H J, GUO E Y, et al. The role of nickel in mechanical performance and corrosion behaviour of nickel-aluminium bronze in 3.5wt.% NaCl solution[J]. Corrosion Science, 2018, 139: 333-345.
    [8]
    张琳, 汪建敏, 储文平, 等. 锻态QAl9-4铝青铜热处理工艺研究[J]. 热加工工艺, 2016, 45(22): 203-206, 213.
    [9]
    应俊龙, 巢昺轩, 李智勇. 热处理工艺对离心铸造QAl10-4-4铝青铜组织及性能的影响[J]. 特种铸造及有色合金, 2021, 41(12): 1568-1571.
    [10]
    KHOROSHKO E, FILIPPOV A, TARASOV S, et al. Strength and ductility improvement through thermomechanical treatment of wire-feed electron beam additive manufactured low stacking fault energy (SFE) aluminum bronze[J]. Metals, 2020, 10(12): 1568.
    [11]
    QIN Z B, ZHANG Q, LUO Q, et al. Microstructure design to improve the corrosion and cavitation corrosion resistance of a nickel-aluminum bronze[J]. Corrosion Science, 2018, 139: 255-266.
    [12]
    HÁJEK J,KŘÍŽ A, CHOCHOLATY O, et al. Effect of heat treatment on micro structural changes in aluminium bronze[J]. Archives of Metallurgy and Materials, 2016, 61(3): 925-930.
    [13]
    王海燕, 李雅莉, 谌岩, 等. 高压处理对铝青铜组织与抗压强度的影响[J]. 高压物理学报, 2013, 27(4): 500-504.
    [14]
    吴国华, 孙江伟, 张亮, 等. 铝锂合金材料研究应用现状与展望[J]. 有色金属科学与工程, 2019, 10(2): 31-46.
    [15]
    DUAN S W, MATSUDA K, ZOU Y, et al. Influence of two-stage ageing process and Cu additions on conductive Al alloys based on AA 6063[J]. Materials Research Express, 2019, 6(10): 106509.
    [16]
    王井井, 黄元春, 刘宇, 等. 时效工艺对Al-Zn-Mg-Cu-Zr-Er铝合金组织与耐腐蚀性影响[J]. 有色金属科学与工程, 2018, 9(2): 47-55.
    [17]
    CHEN R P, LIANG Z Q, ZHANG W W, et al. Effect of heat treatment on microstructure and properties of hot-extruded nickel-aluminum bronze[J]. Transactions of Nonferrous Metals Society of China, 2007, 17(6): 1254-1258.
    [18]
    MI G F, ZHANG J Z, LV S L, et al. The effect of aging heat treatment on the sliding wear behavior of Cu-Al-Fe-(x) alloys[J]. Advanced Materials Research, 2011, （219/220）: 195-201.
    [19]
    DING Y, LV Y T, CHEN K, et al. Effects of microstructure on the stress corrosion cracking behavior of nickel-aluminum bronze alloy in 3.5% NaCl solution[J]. Materials Science and Engineering: A, 2018, 733: 361-373.
    [20]
    BASUMATARY J, WOOD R J K. Different methods of measuring synergy between cavitation erosion and corrosion for nickel aluminium bronze in 3.5% NaCl solution[J]. Tribology International, 2020, 147: 104843.
    [21]
    程飘. Cu-Al-Ni-Fe-Mn铝青铜固溶+二级时效新型热处理工艺试验研究[D]. 镇江:江苏大学, 2017.
    [22]
    XU X X, ZHAO H J, HU Y J, et al. Effect of hot compression on the microstructure evolution of aluminium bronze alloy[J]. Journal of Materials Research and Technology, 2022, 19: 3760-3776.
    [23]
    MENON S K, PIERCE F A, ROSEMARK B P, et al. Strengthening mechanisms in NiAl bronze: hot deformation by rolling and friction-stir processing[J]. Metallurgical and Materials Transactions A, 2012, 43(10): 3687-3702.
    [24]
    吕维洁, 王立强. 镍铝青铜合金组织结构优化及腐蚀疲劳性能[M]. 北京: 科学出版社, 2018.
    [25]
    赵玲, 刘光磊, 张思源, 等. 固溶时效深冷复合处理对ZCuAl10Fe3Mn2合金微观组织和热疲劳性能的影响[J]. 材料工程, 2019, 47(12): 63-70.
    • Related Articles

  • Related Articles

    [1]DU Mingxing, LENG Jinfeng, LI Zhanzhi, YIN Yuhu. Effect of trace Er and Zr addition on mechanical properties of 6082 Al alloy during solid solution-aging treatment[J]. Nonferrous Metals Science and Engineering, 2024, 15(1): 139-146. DOI: 10.13264/j.cnki.ysjskx.2024.01.017
    [2]CHEN Fei, ZHANG Shibin, XIE Yunzhong, WANG Junfeng. Orthogonal test of compound soil curing agents in ionic rare-earth heap leaching sites[J]. Nonferrous Metals Science and Engineering, 2023, 14(6): 887-894. DOI: 10.13264/j.cnki.ysjskx.2023.06.017
    [3]LI Xiaohan, HE Jianing, SU Ruiming, YANG Yuping, NIE Sainan, TAN Bing. Effect on stress corrosion cracking of alloy 7075 with two-step aging[J]. Nonferrous Metals Science and Engineering, 2022, 13(3): 69-75. DOI: 10.13264/j.cnki.ysjskx.2022.03.010
    [4]HUANG Chengge, TANG Daowen, CAI Pengyuan, XIONG Huakang, HUANG Biao. Orthogonal test on the leaching of a refractory gold ore in Guizhou province by bleaching powder[J]. Nonferrous Metals Science and Engineering, 2020, 11(2): 97-103. DOI: 10.13264/j.cnki.ysjskx.2020.02.014
    [5]WANG Song, XIE Ming, LI Aikun, ZHU Gang, WANG Saibei, YANG Youcai, CHEN Song. Preparation and Performance Study of a New Type of Ag-CNTs Electrical Contact Material[J]. Nonferrous Metals Science and Engineering, 2015, 6(5): 40-44. DOI: 10.13264/j.cnki.ysjskx.2015.05.008
    [6]HUANG Jiaquan, WANG Yaping, WANG Huatai, PENG Tangjian, WU Xueling, ZHOU H ongbo, ZENG Weimin. Sulphuric acid leaching of Yulong oxide copper ore based on orthogonal design test[J]. Nonferrous Metals Science and Engineering, 2014, 5(5): 123-129. DOI: 10.13264/j.cnki.ysjskx.2014.05.023
    [7]HE Fu-ping, LIU Feng, LI Jian-yun, ZHANG Jing-en, WANG Zhi-xiang. The effects of solution process and aging on Al-Mg-Si-Cu alloy's microstructure and properties[J]. Nonferrous Metals Science and Engineering, 2013, 4(1): 44-48. DOI: 10.13264/j.cnki.ysjskx.2013.01.013
    [8]ZHANG Ming-ming, WU Yu. On the aging behavior of Cu-Ni-Si-Zr alloy[J]. Nonferrous Metals Science and Engineering, 2012, 3(2): 12-16. DOI: 10.13264/j.cnki.ysjskx.2012.02.017
    [9]XU Fang. Determination of Mn in Aluminum Bronze by ICP-AES[J]. Nonferrous Metals Science and Engineering, 2011, 2(3): 80-82.
    [10]LI Zhao-hui, ZHOU Jian-hua. The Leaching Test Indoor of Ore Oxides in Wushan Copper Mine[J]. Nonferrous Metals Science and Engineering, 2004, 18(3): 22-23.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (53) PDF downloads (5) Cited by()
    Related

    Copyright © 2010 Editorial Department of Nonferrous Metals Science and Engineering All rights reserved

    Address：11th floor, bishop building, University of science and technology, No. 86, Hongqi Avenue, Ganzhou City, Jiangxi Province  Tel：0797-8312555

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return