Citation: | CHENG Li-guo, WU Yan-peng, ZHOU Tie-zhu. Desulfurizing Technology by Calcium and Sodium Double Alkali Method[J]. Nonferrous Metals Science and Engineering, 2011, 2(4): 16-20. |
[1] |
贵阳铝镁设计研究院. 北京: 河南中孚实业股份有限公司预焙阳极工程初步设计[R]. 贵阳: 贵阳铅镁设计研究院.
|
[2] |
杨飏.二氧化硫减排技术与烟气脱硫工程[M].北京:冶金工业出版社, 2004.
|
[3] |
武文江.石灰石-石膏湿法烟气脱硫技术[M].北京:中国水利水电出版社, 2006.
|
[4] |
李继莲.烟气脱硫实用技术[M].北京:中国电力出版社, 2008.
|
[5] |
周至祥, 段建中, 薛建明.火电厂湿法烟气脱硫技术手册[M].北京:中国电力出版社, 2006.
|
[6] |
GB9078-1996, 工业窑炉大气污染物排放标准[S].
|
[7] |
GB13271-2001, 锅炉大气污染物排放标准[S].
|
[8] |
蒋文忠.炭素工艺学[M].北京:冶金工业出版社, 2009.
|
[9] |
王平甫, 宫振.铝电解炭阳极生产与应用[M].北京:冶金工业出版社, 2008.
|
[10] |
薄恩奇.大气污染治理工程[M].北京:高等教育出版社, 1999.
|
[1] | WANG Zhongfeng, FENG Yusheng, HUANG Weiling. Analysis of the influence of different structural configurations on the mixing efficiency of the guide tube mixing tank[J]. Nonferrous Metals Science and Engineering, 2024, 15(6): 814-821. DOI: 10.13264/j.cnki.ysjskx.2024.06.004 |
[2] | WANG Fei, NIU Jiazhen, GUO Shengqi, WANG Junli, GUO Jing. Prediction study of desulfurization during the argon protective electroslag remelting process[J]. Nonferrous Metals Science and Engineering, 2024, 15(4): 487-496. DOI: 10.13264/j.cnki.ysjskx.2024.04.003 |
[3] | TANG Daowen, DONG Xiongwen, LI Junqi, CHEN Xiaohu, YAO Jinhua, SHEN Xiyuan, LEI Shangrong, SHEN Hongyu. Industrial experiment study on preparation of battery grade manganese sulfate by combined desulfurization of pyrolusite and rhodochrosite[J]. Nonferrous Metals Science and Engineering, 2023, 14(4): 454-459. DOI: 10.13264/j.cnki.ysjskx.2023.04.002 |
[4] | JIANG Zhengshuai, XIA Feilong, ZHANG Shanshan, ZHANG Qiang, ZHANG Min. Study on efficient desulfurization and desilication process of low-grade bauxite[J]. Nonferrous Metals Science and Engineering, 2022, 13(3): 26-34. DOI: 10.13264/j.cnki.ysjskx.2022.03.004 |
[5] | YANG Qian, JIN Huixin, YIN Qiannan, XIAO Yuandan, WANG Shangjiefu. Microwave roasting desulfurization pretreatment of high-sulfur bauxite and high-pressure dissolution performance of roasted ore[J]. Nonferrous Metals Science and Engineering, 2021, 12(5): 39-45. DOI: 10.13264/j.cnki.ysjskx.2021.05.005 |
[6] | OUYANG Kun, DOU Zhihe, ZHANG Ting'an, LIU Yan. The desulfurization process of lead and zinc mixed concentrate with oxygen[J]. Nonferrous Metals Science and Engineering, 2020, 11(2): 1-6. DOI: 10.13264/j.cnki.ysjskx.2020.02.001 |
[7] | TONG Zhifang, JIANG Xiyuan, CHEN Tao. Effect of Composition on Sulfur Partition Ratio between CaO-Al2O3-SiO2-TiO2-MgO-Na2O slags and HotIron[J]. Nonferrous Metals Science and Engineering, 2016, 7(1): 5-10. DOI: 10.13264/j.cnki.ysjskx.2016.01.002 |
[8] | YANG Zhiqiang, XIONG Liangfeng, FANG Lin, GAO Qian, TIAN Lipeng. Preparation of new filling cementing materials with sintering desulfurization ash[J]. Nonferrous Metals Science and Engineering, 2015, 6(1): 8-12. DOI: 10.13264/j.cnki.ysjskx.2015.01.002 |
[9] | YANG You-liang, SONG He-jun. Experimental Study on the Efficient Wet Scrubber about the Removal of the Phosphate Dust[J]. Nonferrous Metals Science and Engineering, 2011, 2(1): 92-95. |
[10] | HU Jian-guo, MAO Shi-yi. The Way to Raise Grinding Efficiency[J]. Nonferrous Metals Science and Engineering, 2002, 16(2): 11-12,21. |