Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
JIANG Wen-wu, LI Gou-jian. Roof strata analysis on the empty area falling based on C-ALS[J]. Nonferrous Metals Science and Engineering, 2012, 3(5): 66-69,104. DOI: 10.13264/j.cnki.ysjskx.2012.05.013
Citation: JIANG Wen-wu, LI Gou-jian. Roof strata analysis on the empty area falling based on C-ALS[J]. Nonferrous Metals Science and Engineering, 2012, 3(5): 66-69,104. DOI: 10.13264/j.cnki.ysjskx.2012.05.013

Roof strata analysis on the empty area falling based on C-ALS

More Information
  • Received Date: July 13, 2012
  • Published Date: October 30, 2012
  • Traditional detection approaches are difficult to obtain the actual spatial shape of the complex empty areas due to the limits of detection technology. It poses many problems for further analysis and treatment with empty areas.Using the 0~2 line of the empty areas of Longqiao iron ore as the case, this paper performs laser scanning on it with 3D laser detection system (C-ALS). The data on the shape, size and space position of the empty area are obtained by establishing a 3D geological model with Surpac software. The falling height of overburden rock of the empty area and causes are analyzed. The results show that: the actual height of the empty area is almost equal to the theoretical height values. And this section of roof strata has no falling tendency.
  • [1]
    刘科伟, 李夕兵, 宫凤强, 等.基于CALS及Surpac-FLAC3D耦合技术的复杂空区稳定性分析[J].岩石力学与工程学报, 2008, 27(9): 1924-1931. http://www.cnki.com.cn/Article/CJFDTOTAL-YSLX200809026.htm
    [2]
    吴亚斌.基于CMS实测的采空区群稳定性数值模拟研究[D].长沙:中南大学, 2007. http://cdmd.cnki.com.cn/Article/CDMD-10533-2007172809.htm
    [3]
    陆刚.基于CMS实测的采空区稳定性分析[J].采矿技术, 2012, 12(1): 57-59. http://www.cnki.com.cn/Article/CJFDTOTAL-SJCK201201022.htm
    [4]
    过江, 古德生, 罗周全.金属矿山采空区3D激光探测新技术[J].矿冶工程, 2006, 26(5): 16-19. http://www.cnki.com.cn/Article/CJFDTOTAL-KYGC200605004.htm
    [5]
    张新光, 张金龙, 朱和玲.空区激光自动扫描系统(CALS)的研究与应用[J].采矿技术, 2009, 9(1): 70-72. http://www.cnki.com.cn/Article/CJFDTOTAL-SJCK200901025.htm
    [6]
    石志纯, 赵国彦, 李发本.地下复杂采空区的探测[J].采矿技术, 2005, 5(4): 103-104. http://www.cnki.com.cn/Article/CJFDTOTAL-SJCK200504045.htm
    [7]
    罗周全, 刘晓明, 杨彪, 等.采空区精密探测技术应用研究[J].矿业研究与开发, 2006(s2): 87-90. http://www.cqvip.com/qk/90093A/2006B11/23487590.html
    [8]
    李夕兵, 李地元, 赵国彦, 等.金属矿地下采空区探测、处理与安全评判[J].采矿与安全工程学报, 2006, 23(1): 24-29. http://www.cnki.com.cn/Article/CJFDTOTAL-KSYL200601006.htm
    [9]
    马海涛, 刘勇锋, 胡家国.基于CALS采空区探测及三维模型可视化研究[J].中国安全生产科学技术, 2010, 6(3): 38-41. http://www.cnki.com.cn/Article/CJFDTOTAL-LDBK201003008.htm
    [10]
    罗周全, 刘晓明, 苏家红, 等.基于Surpac的矿床三维模型构建[J].金属矿山, 2006(4):33-36. http://www.cnki.com.cn/Article/CJFDTOTAL-JSKS200604009.htm
    [11]
    孙豁然, 许德明.建立矿体三维实体模型的研究[J].矿业研究与开发, 1999, 19(5):1-3. http://www.cnki.com.cn/Article/CJFDTOTAL-KYYK199905000.htm
    [12]
    周智勇, 陈建宏, 周科平.Surpac Vision软件在矿床建模中的应用[J].矿业工程, 2004(4):56-58. http://www.cnki.com.cn/Article/CJFDTOTAL-GWKS200404024.htm
    [13]
    罗周全, 李畅, 杨彪.金属矿采空区信息获取及管理研究[J].有色金属:矿山部分, 2008, 60(10): 7-10. http://www.cnki.com.cn/Article/CJFDTOTAL-YSKU200801005.htm

Catalog

    Article Metrics

    Article views (65) PDF downloads (3) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return