Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
CAI Xu. On Adjusting and Optimizing Operating Parameters of 6-S Shakers Used in the Dressing Plant of a Cobalt Oxide Mine[J]. Nonferrous Metals Science and Engineering, 2010, 24(1): 40-42.
Citation: CAI Xu. On Adjusting and Optimizing Operating Parameters of 6-S Shakers Used in the Dressing Plant of a Cobalt Oxide Mine[J]. Nonferrous Metals Science and Engineering, 2010, 24(1): 40-42.

On Adjusting and Optimizing Operating Parameters of 6-S Shakers Used in the Dressing Plant of a Cobalt Oxide Mine

More Information
  • Received Date: November 29, 2009
  • Published Date: March 20, 2010
  • Ore association is very complicated in a cobalt oxide mine located in Province du Katanga of Congo. Shaking tables technology is applied in ore dressing.The operating parameters 6-S-types shaking table, such as, feed ore concentration, bulk, dressing volume, horizontal angle of shaking table, quantity of washing water, stroke and frequency, etc.are adjusted and optimized.Comparing with the original process, cobalt recycle rate rose by 8%-10%.And cobalt concentrate grade rose to 12%.
  • Related Articles

    [1]ZHENG Ya, LIU Juan, YU Qiang, MU Yichen, ZHAO Xiaoyu, LI Xiaocheng. Preparation of micro-nano hierarchical Si/C composites by CO2 oxidation of porous Mg2Si and lithium storage properties[J]. Nonferrous Metals Science and Engineering, 2024, 15(2): 256-264. DOI: 10.13264/j.cnki.ysjskx.2024.02.012
    [2]HUANG Haohui, SUN Haipeng, FAN Qizhe, YU Changlin, JI Hongbing. Research progress in fabrication and application of S-scheme heterojunction photocatalysts[J]. Nonferrous Metals Science and Engineering, 2022, 13(5): 68-79. DOI: 10.13264/j.cnki.ysjskx.2022.05.009
    [3]HE Jiangfan, WU Peijia, GUANG Weixin, LI Xin, SHU Qing. Synthesis and selectivity of anode material La0.75Sr0.25Cr0.5Mn0.5O3-δ for solid oxide fuel cell[J]. Nonferrous Metals Science and Engineering, 2018, 9(5): 33-36, 48. DOI: 10.13264/j.cnki.ysjskx.2018.05.006
    [4]GUO Xueyi, WANG Songsong, WANG Qinmeng, TIAN Qinghua. Development and application of oxygen bottom blowing copper smelting simulation software SKSSIM[J]. Nonferrous Metals Science and Engineering, 2017, 8(4): 1-6. DOI: 10.13264/j.cnki.ysjskx.2017.04.001
    [5]WEN Yan, ZHANG Qinying, GUO Shengda, SU Wei, HUANG Zhu, CHEN Hao. SPS sintering process of WC-6Co cemented carbide[J]. Nonferrous Metals Science and Engineering, 2017, 8(3): 74-78. DOI: 10.13264/j.cnki.ysjskx.2017.03.012
    [6]YANG Wen-long, LIU Bo-lu, ZHANG Wen-zhong, ZHAO Zhi-gang. AC variable frequency technology of DC traction motor vehicle in the underground tungsten mine[J]. Nonferrous Metals Science and Engineering, 2011, 2(6): 97-100.
    [7]QIN Juan, WANG Jun, ZHANG Shui-ping. On Mining Safety Standardization File Management System Base on B/S Mode[J]. Nonferrous Metals Science and Engineering, 2011, 2(4): 81-85.
    [8]WANG Jian-ru, LIU Zu-wen, ZHU Qiang, XU Jian-hong. On the Factors Affecting the Phosephorus and Nitrogen Removal by Carrousel Oxidation Ditch Process[J]. Nonferrous Metals Science and Engineering, 2011, 2(1): 51-54.
    [9]CAI Xu. On the Application of Slon High-gradient Magnetic Separator in Cobalt Oxide Mine[J]. Nonferrous Metals Science and Engineering, 2009, 23(2): 16-17,22.
    [10]PENG Xian_hong, XIU De_jiang, ZHANG Hong_ke. The Test and Application of MVS High Frequency Vibrating Mesh Screen in Dahushan Ore Dressing Plant[J]. Nonferrous Metals Science and Engineering, 2003, 17(2): 20-21,37.

Catalog

    Article Metrics

    Article views (99) PDF downloads (1) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return