Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
HU Shan-ling, ZHANG Xiao-lian, QIU Chen-zhou, PENG Guang-huai. Determination of Zirconium in Rare earth-Magnesium-Zirconium Master Alloy[J]. Nonferrous Metals Science and Engineering, 2008, 22(4): 45-46.
Citation: HU Shan-ling, ZHANG Xiao-lian, QIU Chen-zhou, PENG Guang-huai. Determination of Zirconium in Rare earth-Magnesium-Zirconium Master Alloy[J]. Nonferrous Metals Science and Engineering, 2008, 22(4): 45-46.

Determination of Zirconium in Rare earth-Magnesium-Zirconium Master Alloy

More Information
  • Received Date: August 27, 2008
  • Published Date: December 30, 2008
  • Zirconium in rare earth-magnesium-zirconium master alloy was determined by EDTA titrimetry.Series of experiments were performed to investigate the decomposing method,titration acidity and temperature.Interferences of matrix and impurities were analyzed and the removal steps were proposed.The relative standard deviation was less than 2.5 % and the recovery rate by standard addition method was in the range of 98.9 %~101.8 %.
  • [1]
    唐娜娜,郝平.EDTA快速滴定法测定铜合金中锆[J].冶金分析,2002,22(5):67-68. http://d.wanfangdata.com.cn/Conference/53391
    [2]
    朱利亚,赵泽松,陶赛祥,等.难溶金锆系列合金的微波消解及锆的滴定[J].贵金属,2006,27(3):35-39. http://www.cqvip.com/QK/91992X/200603/22313393.html
    [3]
    孙宇红,徐炜.EDTA络合滴定法测定铝锆中间合金中的锆[J].兵器材料科学与工程,2004,27(5):47-48. https://www.wenkuxiazai.com/doc/8d82134533687e21af45a9d5...
    [4]
    张光,高霞.ICP-AES法同时测定低合金钢中锆和铌[J].冶金分析,2004,24(1):44-47. http://www.doc88.com/p-799222379866.html
    [5]
    南京大学《无机及分析化学》编写组.无机及分析化学[M].4版.北京:高等教育出版社,2006:356.
    [6]
    王永双,张俊安,余磊.锆液返滴定法测定锆刚玉中锆[J].冶金分析,2003,23(6):33-35. http://www.cqvip.com/QK/83176X/200204/7464221.html
  • Related Articles

    [1]SONG Jianqing, LI Yuhu, ZHANG Min, SUN Liang. Study on the preparation of rod-like zirconia powder by direct pyrolysis[J]. Nonferrous Metals Science and Engineering, 2022, 13(4): 28-34. DOI: 10.13264/j.cnki.ysjskx.2022.04.004
    [2]HOU Yifei, SUN Jian, BAI Ni, SUN Yongfen, JU Dianchun. Recovery of ZrO2 from zirconium-containing waste salt based on response surface methodology[J]. Nonferrous Metals Science and Engineering, 2021, 12(6): 26-34. DOI: 10.13264/j.cnki.ysjskx.2021.06.004
    [3]HE Yong, LI Kun. Preparation of nano86.2W-13.1Fe-0.7Ni composite powder by combined EDTA-NH3 complexing process[J]. Nonferrous Metals Science and Engineering, 2018, 9(1): 71-76. DOI: 10.13264/j.cnki.ysjskx.2018.01.012
    [4]YANG Shaohua, LIN Ming, LIU Zengwei, LI Linshan, ZHAO Yujuan. Electrochemical reduction mechanism of Zr4+ on tungsten electrode in LiF-CaF2-BaF2-ZrO2 molten salt[J]. Nonferrous Metals Science and Engineering, 2017, 8(5): 70-75. DOI: 10.13264/j.cnki.ysjskx.2017.05.010
    [5]BAO Morigengaowa, WANG Zhaowen, DING Chenliang, GAO Bingliang, SHI Zhongning, HU Xianwei, YU Jiangyu. Preparation of pure Al-Zr master alloy from Al reducing ZrO2 dissolved in molten salt[J]. Nonferrous Metals Science and Engineering, 2014, 5(4): 13-17. DOI: 10.13264/j.cnki.ysjskx.2014.04.003
    [6]QIU Cai-hua, LUO Fang-cheng, HUANG Ke-long. Zirconium basic carbonate preparation by low-temperature solid-phase reaction method[J]. Nonferrous Metals Science and Engineering, 2013, 4(1): 37-39,66. DOI: 10.13264/j.cnki.ysjskx.2013.01.007
    [7]ZENG Ji-ping. On the Uncertainty Evaluation of Yttria Content by EDTA Titration[J]. Nonferrous Metals Science and Engineering, 2009, 23(2): 46-48.
    [8]CHEN Jin-feng. Determination of Pb, Zn in High Content Core Samples by Trace Titration Method with EDTA[J]. Nonferrous Metals Science and Engineering, 2007, 21(2): 37-39.
    [9]XIAO Yong. Hydrofluoric Acid Separating -EDTA Capacity Measuring of Total RareEarth Content in Neodymium-iron-boron Waste Material[J]. Nonferrous Metals Science and Engineering, 2007, 21(1): 40-41.
    [10]OU Li-ling. The EDTA Volumetric Method for the Determination of Calcium Content[J]. Nonferrous Metals Science and Engineering, 2007, 21(1): 38-39.
  • Cited by

    Periodical cited type(7)

    1. 周晨,秦镜,胡铜生. 织构微调对C7025铜合金板带折弯性能的影响. 江西冶金. 2024(06): 456-464 .
    2. 李律达,洪鑫,满绪存,陈俏,张建波,刘锦平. Cu-Ni-Ti合金高温热变形行为及热加工图. 有色金属科学与工程. 2022(01): 44-51 . 本站查看
    3. 韩明达,邢美山,李文亮. 浅谈冷变形量对QBe2合金时效析出的影响. 中国新技术新产品. 2021(13): 15-17 .
    4. 李文亮,邢美山,张程. QBe2合金大规格扁锭铍含量及硬度均匀性分析. 中国金属通报. 2021(08): 89-90 .
    5. 吴文博,韩明达,赵树昌. QBe2合金热轧板坯料罩式炉退火工艺的确定. 世界有色金属. 2021(16): 113-115 .
    6. 吴文博,李海龙,郑学清. 高铍青铜铸锭均匀化热处理炉的精准控温验证. 金属世界. 2020(04): 57-60 .
    7. 吴文博,李海龙,李树荣. Cu-Ni-Si合金起皮原因分析. 世界有色金属. 2020(09): 145-146 .

    Other cited types(2)

Catalog

    Article Metrics

    Article views (109) PDF downloads (5) Cited by(9)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return