Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
JIANG Si-hai, LI De-bin. Decision for Mining and Dressing of Low-grade Ores by Breakeven Grades[J]. Nonferrous Metals Science and Engineering, 2006, 20(1): 22-25.
Citation: JIANG Si-hai, LI De-bin. Decision for Mining and Dressing of Low-grade Ores by Breakeven Grades[J]. Nonferrous Metals Science and Engineering, 2006, 20(1): 22-25.

Decision for Mining and Dressing of Low-grade Ores by Breakeven Grades

More Information
  • Received Date: December 16, 2005
  • Published Date: March 30, 2006
  • The method of breskeven grades is used to decide if the black-spot ores are economic or not in Yichun Ta & Nb Mine and make decision of mining and dressing.If the grades of black-spot ores are lower than present balance grades, the mines which are mining and dressing the ores will suffer loss.The result is that the blackspot ores are sub-marginal economical resources and are not worth exploring.
  • [1]
    国土资源部储量司. GB/T17766-1999固体矿产资源/储量分类[S]. 北京: 中国标准出版社, 1999. http://www.doc88.com/p-60799065577.html
    [2]
    赵瑞荣.露天矿短期生产计划边界品位的确定原则与计算[J].中国矿业, 1998, (3):16. http://www.wenkuxiazai.com/doc/4dd8bbed58fafab068dc024c-2.html
  • Related Articles

    [1]JIN Xinyan, REN Yuling, LIN Chuanhua, WANG Kai. Influence of Fe on Cr content in Al-Zn-Mg-Si molten bath[J]. Nonferrous Metals Science and Engineering, 2023, 14(5): 633-640. DOI: 10.13264/j.cnki.ysjskx.2023.05.005
    [2]MA Jimiao, LIU Feng, LIU Longming, SHAO Ye, ZHENG Yun, PENG Lijun. Cold hardening and recrystallization temperature of Cu-Ni-Si-P alloy[J]. Nonferrous Metals Science and Engineering, 2017, 8(2): 43-46. DOI: 10.13264/j.cnki.ysjskx.2017.02.007
    [3]TAN Ying, LIN Xiangfei, ZHANG Shidao, WANG Hongyang, LIN Gaoyong. Abnormal mechanical behaviors of deformed Zn-Cu-Ti alloy[J]. Nonferrous Metals Science and Engineering, 2015, 6(6): 57-64. DOI: 10.13264/j.cnki.ysjskx.2015.06.011
    [4]LIU Fei-fei, LIU Hui-hui, LI Jun-rong. Soft measurement modeling of WO3 leaching rate based on artificial neural network[J]. Nonferrous Metals Science and Engineering, 2013, 4(5): 117-121. DOI: 10.13264/j.cnki.ysjskx.2013.05.004
    [5]LI Xin, YU Chang-lin, FAN Qi-zhe, YANG Kai, CAO Fang-fang. Solvothermal preparation spherical ZnS nano-photocatalyst and its photocatalytic activity[J]. Nonferrous Metals Science and Engineering, 2012, 3(3): 21-26. DOI: 10.13264/j.cnki.ysjskx.2012.03.008
    [6]WU Yong-sheng. Causes analyzed and takened countermeasure to the gold displacement rate's decrease[J]. Nonferrous Metals Science and Engineering, 2011, 2(5): 36-40.
    [7]LI Peng-fei, CHEN Jin-qing, LI Ming-Zhou, LI Yun-feng. The Technology Measure of the Vacuum Smelting NdFeB Alloy Spindle to Enhance the Receiving Rate[J]. Nonferrous Metals Science and Engineering, 2007, 21(3): 30-32.
    [8]LI Guo-lin, HUANG Qi, LIAN Zhong-jun, ZHAO Jun. The Optimized Structural Transformation of the Work Bin Discharge Pipe of Aluminium Electrolysing Cell[J]. Nonferrous Metals Science and Engineering, 2006, 20(3): 47-48.
    [9]MA Rui-jun. Discussion on Reducing Ores Dilution and Loss Rates Effectively in Shallow Shrinkage Stoping in Longtoushan Gold Mine of Guangxi[J]. Nonferrous Metals Science and Engineering, 2005, 19(4): 14-17.
    [10]GUO Jin-feng. Technical Progress and Applied Perspective of Tailing Disposal in Abandoned Workings of Mine[J]. Nonferrous Metals Science and Engineering, 2002, 16(1): 1-4.

Catalog

    Article Metrics

    Article views (105) PDF downloads (4) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return