Citation: | YIN Hong. On the Application of Outer-hole Blast in Medium Length Hole[J]. Nonferrous Metals Science and Engineering, 2009, 23(3): 21-22, 41. |
[1] |
王玉杰.爆破工程(高等学校教材)[M].武汉:武汉理工大学出版社, 2007.
|
[2] |
中国工程爆破协会.中国典型爆破工程与技术[M].北京:冶金工业出版社, 2006.
|
[3] |
本书编委会.新编世界采矿设计施工新工艺新技术实用手册[M].北京:冶金工业出版社, 2007.
|
[1] | Deng Fei, HAN Xiao-liang, Liao sheng-yin, Wang Chun-hui, Hu Long-fei, Yin Li bing. The Numerical Simulation Research of Deep Hole Blasting On the Mine Roadway's Vibrating intensiy[J]. Nonferrous Metals Science and Engineering, 2015, 6(6): 106-110. DOI: 10.13264/j.cnki.ysjskx.2015.06.019 |
[2] | WANG Liu, RAO Yunzhang, ZHU Weimin, SHAO Yajian. Delay time identification of millisecond blasting based on HHT method[J]. Nonferrous Metals Science and Engineering, 2015, 6(1): 70-73. DOI: 10.13264/j.cnki.ysjskx.2015.01.013 |
[3] | DENG Fei, CHENG Qiuting, CHEN Yanhong, HU Yonghui, WANG Xiaojun. Experimental study on the optimized blasting parameters for medium-depth hole[J]. Nonferrous Metals Science and Engineering, 2015, 6(1): 66-69. DOI: 10.13264/j.cnki.ysjskx.2015.01.012 |
[4] | WU Xianzhen, YIN Libing, HU Wei, GAO Xiang, WANG Liangliang. Vibration intensity of multi milliseconds blasting in underground mine based on LS-DYNA[J]. Nonferrous Metals Science and Engineering, 2014, 5(6): 100-104. DOI: 10.13264/j.cnki.ysjskx.2014.06.017 |
[5] | RAO Yun-zhang, WANG Chun-hua, HUANG Tie-ping, PENG Le-ping. The optimization of blasting parameters in the medium depth hole in a limestone mine[J]. Nonferrous Metals Science and Engineering, 2011, 2(6): 47-51. |
[6] | SUN Zhi-hua, LIU Hong-xing. The Optimized Technical Study of Medium-length Hole Explosive Technique in High Temperature and High Sulphur Stope of Copper Mine[J]. Nonferrous Metals Science and Engineering, 2010, 24(1): 29-31, 39. |
[7] | LEI Rong-hua. The Application of Millisecond-Detonator in Piaotang Mine[J]. Nonferrous Metals Science and Engineering, 2008, 22(1): 16-18. |
[8] | WANG Shi-ming. The Research of Trench Roof at the Bottom of Stope of Large Diameter Deep Hole Mining[J]. Nonferrous Metals Science and Engineering, 2006, 20(1): 15-18. |
[9] | ZHANG Xu-sheng, YU Jian. Influence of Joint Fissure upon the Blasting Effect of Mediunm-length Hole in Dahongshan Copper Mine[J]. Nonferrous Metals Science and Engineering, 2005, 19(4): 10-13, 39. |
[10] | GUO Zhao-lei. The Study of a Series of Blasting Funnel Tests of Medium-length Hole Mining[J]. Nonferrous Metals Science and Engineering, 2004, 18(3): 3-6. |