Citation: | DENG Fei, CHENG Qiuting, CHEN Yanhong, HU Yonghui, WANG Xiaojun. Experimental study on the optimized blasting parameters for medium-depth hole[J]. Nonferrous Metals Science and Engineering, 2015, 6(1): 66-69. DOI: 10.13264/j.cnki.ysjskx.2015.01.012 |
[1] |
胡勇辉, 刘连生.基于BP神经网络的沉积岩型矿山爆破开采成本的预测与控制模型[J].中国矿业, 2013(11):75-79. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKA201311020.htm
|
[2] |
章清涛.矽卡岩矿体爆破漏斗试验及爆破参数探究[J].有色金属设计, 2012, 39(3):6-9. http://www.cnki.com.cn/Article/CJFDTOTAL-YJSS201203001.htm
|
[3] |
蒋复量.金属矿矿岩可爆性评价及井下采场深孔爆破参数优化的理论与试验研究[D].长沙:中南大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10533-1012474960.htm
|
[4] |
陈武昌, 李永辉, 曹安华, 等.祁雨沟矿区爆破参数试验[J].现代矿业, 2011(6):77-79. http://www.cnki.com.cn/Article/CJFDTOTAL-KYKB201106031.htm
|
[5] |
汪锐, 赵坤, 单强, 等.无底柱超高分段室内物理放矿模拟试验[J].现代矿业, 2011(4):4-6. http://www.cnki.com.cn/Article/CJFDTOTAL-KYKB201104001.htm
|
[6] |
刘文仕, 王大勇, 金宇松, 等.深部开采层状软岩巷道支护方式模拟分析[J].采矿技术, 2012, 12(5):69-70. http://www.cnki.com.cn/Article/CJFDTOTAL-SJCK201205031.htm
|
[7] |
葛玉桐.深孔凿岩爆破工艺在小寺沟铜矿的实践[J].管理学家, 2012(24):484-486.
|
[8] |
任高峰, 王威, 冯海昀, 等.融冠1号矿中深孔爆破参数优化研究[J].爆破, 2011, 28(3):34-35. http://www.cnki.com.cn/Article/CJFDTOTAL-BOPO201103010.htm
|
[9] |
范育青.马头山复杂矿体安全高效开采综合技术研究[D].南宁:广西大学, 2009. http://industry.wanfangdata.com.cn/dl/Detail/Thesis?id=Thesis_Y1599124
|
[10] |
吴光玲.黄麦岭露天矿台阶爆破合理超深研究[D].武汉:武汉理工大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10497-1011104971.htm
|
[11] |
吴荣, 高安龙, 江学, 等.梅山铁矿大结构参数下合理崩矿步距研究[J].金属矿山, 2012(5):5-8. http://www.cnki.com.cn/Article/CJFDTOTAL-JSKS201205003.htm
|
[12] |
李春.香炉山钨矿中深孔爆破参数优化研究[J].中国钨业, 2012, 27(4):11-15. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGWU201204005.htm
|
[1] | HUANG Chengge, TANG Daowen, CAI Pengyuan, XIONG Huakang, HUANG Biao. Orthogonal test on the leaching of a refractory gold ore in Guizhou province by bleaching powder[J]. Nonferrous Metals Science and Engineering, 2020, 11(2): 97-103. DOI: 10.13264/j.cnki.ysjskx.2020.02.014 |
[2] | Deng Fei, HAN Xiao-liang, Liao sheng-yin, Wang Chun-hui, Hu Long-fei, Yin Li bing. The Numerical Simulation Research of Deep Hole Blasting On the Mine Roadway's Vibrating intensiy[J]. Nonferrous Metals Science and Engineering, 2015, 6(6): 106-110. DOI: 10.13264/j.cnki.ysjskx.2015.06.019 |
[3] | RAO Yun-zhang, WANG Chun-hua, HUANG Tie-ping, PENG Le-ping. The optimization of blasting parameters in the medium depth hole in a limestone mine[J]. Nonferrous Metals Science and Engineering, 2011, 2(6): 47-51. |
[4] | YU Jian-zhang. Semi-industrial Tests of Tantalum and Niobium Processing by Nelson Centrifugal Concentrator[J]. Nonferrous Metals Science and Engineering, 2011, 2(1): 77-80. |
[5] | HUANG Shao-sheng, HUANG Shan-xiu. Industrial Testing Research of Gasification Briquette by Using Long-flame Coal[J]. Nonferrous Metals Science and Engineering, 2010, 24(3-4): 148-151. |
[6] | YIN Hong. On the Application of Outer-hole Blast in Medium Length Hole[J]. Nonferrous Metals Science and Engineering, 2009, 23(3): 21-22, 41. |
[7] | ZHOU Yuan. Ways to Improve Blast Effect of Mid & Deep Mining Holes[J]. Nonferrous Metals Science and Engineering, 2009, 23(1): 7-8,17. |
[8] | ZHANG Xu-sheng, YU Jian. Influence of Joint Fissure upon the Blasting Effect of Mediunm-length Hole in Dahongshan Copper Mine[J]. Nonferrous Metals Science and Engineering, 2005, 19(4): 10-13, 39. |
[9] | GUO Zhao-lei. The Study of a Series of Blasting Funnel Tests of Medium-length Hole Mining[J]. Nonferrous Metals Science and Engineering, 2004, 18(3): 3-6. |
[10] | PENG Yong-hua. The Blast Test of 150mm Hole[J]. Nonferrous Metals Science and Engineering, 2002, 16(2): 5-7. |