Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
HUANG Yao, SU Zhigang, ZHU Binrong, CHEN Yunxiang, WAN Tao, TUO Zuxiong. Influence of corrosion on bearing capacity characteristics of overhead transmission line tower[J]. Nonferrous Metals Science and Engineering, 2024, 15(5): 723-731. DOI: 10.13264/j.cnki.ysjskx.2024.05.012
Citation: HUANG Yao, SU Zhigang, ZHU Binrong, CHEN Yunxiang, WAN Tao, TUO Zuxiong. Influence of corrosion on bearing capacity characteristics of overhead transmission line tower[J]. Nonferrous Metals Science and Engineering, 2024, 15(5): 723-731. DOI: 10.13264/j.cnki.ysjskx.2024.05.012

Influence of corrosion on bearing capacity characteristics of overhead transmission line tower

More Information
  • Received Date: April 26, 2023
  • Revised Date: June 18, 2023
  • To effectively evaluate the impact of corrosion on the bearing capacity characteristics of long-term service towers, scanning electron microscopy, tensile testing, axial compression bearing capacity testing, and simulation methods were used to study the effects of different degrees of corrosion on the corrosion rate, yield strength, tensile strength, elongation after fracture, elastic modulus, and bearing capacity of tower components. The research results indicate that the yield strength, tensile strength, and elongation after fracture of tower components will decrease nonlinearly with the increasing corrosion degree, while the elastic modulus is basically not affected by corrosion. The greater the cross-sectional loss rate, the lower the bearing capacity of the component. The effect of corrosion at the middle position is greater than that at the edge position.

  • [1]
    高超, 刘建军, 郑逸川, 等. 腐蚀对输电塔角钢力学性能的影响[J]. 腐蚀与防护, 2020, 41(8): 32-38.
    [2]
    邓长征, 郭轶磊, 张康伟, 等. 输电线路铁塔腐蚀塔腿补强措施及仿真计算[J]. 三峡大学学报(自然科学版), 2019, 41(1): 76-80.
    [3]
    钟灵强, 汪志刚, 陈荣春, 等. 稀土在汽车用先进高强钢中的研究现状[J]. 有色金属科学与工程, 2020, 11(6): 114-123.
    [4]
    陈昭, 郑英, 朱晨, 等. 预拉伸对7075铝合金中厚板几何精度和力学性能的影响[J]. 有色金属科学与工程, 2019, 10(6): 40-47.
    [5]
    王井井, 黄元春, 刘宇, 等. 时效工艺对Al-Zn-Mg-Cu-Zr-Er铝合金组织与耐腐蚀性影响[J]. 有色金属科学与工程, 2018, 9(2): 47-55.
    [6]
    樊平成, 李军, 李龙, 等. 电网设备金属部件的腐蚀与防护[J]. 黑龙江电力, 2021, 43(4): 307-311.
    [7]
    INOUE S, YOSHIMURA T . Influence of corrosion on the degradation of overhead line conductors[J]. Zairyo to Kankyo, 2009, 27(4): 179-193.
    [8]
    李文翰, 尹学涛, 周学杰, 等. 电网输变电设备钢结构和镀锌构件的大气腐蚀与防护措施[J]. 材料保护, 2018, 51(10): 114-118.
    [9]
    陈云翔, 倪清钊, 林德源, 等. 大气环境下电网设备金属材料的腐蚀及服役寿命预测研究进展[J]. 材料导报,2016, 30(21): 89-96.
    [10]
    RAFAEL A, ALBERTO D C, NAIARA D, et al. Influence of a lossy ground on the lightning performance of overhead transmission lines[J]. Electric Power Systems Research, 2023, 214: 1-11.
    [11]
    韩军科, 严红, 黄耀, 等. 耐候钢表面氧化皮的结构特征及其对大气腐蚀行为的影响[J]. 金属学报, 2017, 53(2): 163-174.
    [12]
    TOSHINORI K, SATOSHI T. Applicability of AC impedance method for measuring time-variant corrosion rate to cracked and crack-repaired reinforced concrete[J]. Materials and Structures, 2023, 56(20):1-13.
    [13]
    KASHANI M M, LOWES L N, CREWE A J, et al. Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars[J]. Engineering Structures, 2014, 75(15):113-125.
    [14]
    顾伟华, 张大长, 曹世山. 输电铁塔单角钢轴压承载力计算公式及试验研究[J]. 建筑钢结构进展, 2020, 22(1): 78-84.
    [15]
    徐春丽. 钢管混凝土抗剪承载力计算公式的推导与验证[J]. 四川建筑科学研究, 2016, 42(4): 17-21.
    [16]
    徐士祺. 基于有限元技术的不锈钢表面的缝隙腐蚀仿真分析[J]. 热加工工艺, 2013, 42(16): 117-119.
    [17]
    默增禄, 程志云. 输电线路杆塔的腐蚀与防治对策[J]. 电力建设, 2004(1): 22-23.
    [18]
    黄士君. 输电铁塔受腐蚀节点蚀余力学性能的有限元分析[J]. 常州大学学报(自然科学版), 2015, 27(3): 35-38.
    [19]
    汪延寿. 风荷载作用下输电塔结构体系可靠度分析[J]. 山西建筑, 2009, 35(16): 53-54.
    [20]
    杨风利.考虑螺栓连接滑移影响的输电铁塔塔身结构分析[J].工程力学,2018,35(增刊1):193-199.
    [21]
    杨风利, 李正, 张大长, 等. 输电铁塔双螺母防松螺栓横向振动试验研究[J]. 振动与冲击, 2018, 37(10): 164-171.
    [22]
    张春涛, 范文亮, 李正良. Q345等边角钢腐蚀疲劳性能试验研究[J]. 振动与冲击, 2014, 33(2): 193-198.
    [23]
    张春涛, 范文亮, 李正良. 腐蚀方式对Q345等边角钢疲劳性能的影响[J]. 工程力学, 2013, 30(10): 211-218.
    [24]
    李杰, 巫世晶, 吴利霞, 等. 受腐蚀输电杆塔整体结构安全性分析与评估[J]. 水电能源科学, 2016, 34(1): 176-178.
  • Related Articles

    [1]DONG Yuehua, MAN Jingjin, WANG Zhigang, WANG Hang. Corrosion resistance prediction model of copper-nickel BFe10-1-1 alloy based on grain-boundary image[J]. Nonferrous Metals Science and Engineering, 2021, 12(5): 61-68. DOI: 10.13264/j.cnki.ysjskx.2021.05.008
    [2]LAI Dan, YANG Hua, LUO Xiang. Influence of economic policy uncertainty on operating efficiency——with listed companies in the non-ferrous metal industry as the case[J]. Nonferrous Metals Science and Engineering, 2020, 11(4): 98-105. DOI: 10.13264/j.cnki.ysjskx.2020.04.015
    [3]Zou Guo-liang, Wu Yi-ding, Cai Si-jing. Policy orientation of rare earth resources mining based on perspective of resources and environment protection[J]. Nonferrous Metals Science and Engineering, 2016, 7(2): 147-152. DOI: 10.13264/j.cnki.ysjskx.2016.02.026
    [4]XU Sheng-hua. Structural optimization of China's tungsten industry chain[J]. Nonferrous Metals Science and Engineering, 2013, 4(5): 108-112. DOI: 10.13264/j.cnki.ysjskx.2013.05.003
    [5]LIAO Lie-fa, MAO Ke-zhen. The environmental regulation strategies in China 's rare earth industry:Enlightenment from the foreign environmental regulation policy[J]. Nonferrous Metals Science and Engineering, 2013, 4(1): 89-94. DOI: 10.13264/j.cnki.ysjskx.2013.01.004
    [6]ZHONG Lin, LIANG Min. The sustainable development strategy of China's RE resources from the perspective of rare earth export taxation policy change[J]. Nonferrous Metals Science and Engineering, 2012, 3(4): 100-107. DOI: 10.13264/j.cnki.ysjskx.2012.04.009
    [7]ZHENG Ming-gui, CHEN Yan-hong. Supply and demand of global rare earth resources and China's rare earth industry policy[J]. Nonferrous Metals Science and Engineering, 2012, 3(4): 70-74. DOI: 10.13264/j.cnki.ysjskx.2012.04.003
    [8]LIU Yan, RAO Zheng-hua. On the Competitiveness of Jiangxi Rare Earth Industry[J]. Nonferrous Metals Science and Engineering, 2008, 22(1): 3-6, 10.
    [9]CHEN Jia-bin. Discussion on the Supply and Demand Situation of Aluminium Resources and the Relevant Policy in China[J]. Nonferrous Metals Science and Engineering, 2004, 18(2): 6-8.
    [10]GUO Ming-quan. A Brief Comment on the Electrovalence Policy and the Measures of Reducing the Electric Cost for the Enterprises[J]. Nonferrous Metals Science and Engineering, 2000, 14(2): 37-39, 46.

Catalog

    Article Metrics

    Article views (40) PDF downloads (3) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return