Current Issue Cover
Advanced Search
Founded in 1987， Bimonthly
Supervisor：Jiangxi University Of Science And Technology
Sponsored by：Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN：1674-9669
CN：36-1311/TF
CODEN YJKYA9
Volume 12 Issue 6
Dec.  2021
Turn off MathJax
Article Contents
Abstract
References
Related Articles
CHEN Weiqing, XU Guanming, CUI Ziyi, YU Jiatian, ZHANG Xuehui, WANG Chunming. Microstructure and mechanical properties of 7B85 alloy ultrasonic rolling treated 7B85 alloy[J]. Nonferrous Metals Science and Engineering, 2021, 12(6): 80-87. DOI: 10.13264/j.cnki.ysjskx.2021.06.011
Citation: CHEN Weiqing, XU Guanming, CUI Ziyi, YU Jiatian, ZHANG Xuehui, WANG Chunming. Microstructure and mechanical properties of 7B85 alloy ultrasonic rolling treated 7B85 alloy[J]. Nonferrous Metals Science and Engineering, 2021, 12(6): 80-87. DOI: 10.13264/j.cnki.ysjskx.2021.06.011
shu

Microstructure and mechanical properties of 7B85 alloy ultrasonic rolling treated 7B85 alloy

  • a.

    Faculty of Materials Metallurgy and Chemistry, Ganzhou 341000, Jiangxi, China

  • b.

    Institute of Bioadditive Manufacturing, Jiangxi University of Science and Technology, Nanchang 330013, China

More Information
  • Received Date: May 23, 2021
  • Published Date: December 30, 2021
    Graphical Abstract
    • Abstract
  • The 7B85 alloy was treated by ultrasonic rolling treatment (USRT) with different preloading depth (0, 0.1, 0.2, 0.3 and 0.4 mm). The microstructure and mechanical properties of 7B85 alloy treated by ultrasonic rolling were investigated by optical microscope, surface roughness tester, micro Vickers hardness test, tensile test, scanning electron microscope, X-ray diffraction and electron back scattering diffraction. The results show that the surface roughness, microhardness and tensile strength of 7B85 alloy treated by ultrasonic surface rolling reached the optimal value, when the preloading depth was 0.2 mm. The fracture morphology of the 7B85 alloy showed a large number of deep dimples, which were mainly in the form of ductile fracture. Meanwhile, most of the η precipitates in the 7B85 alloy are dissolved into the aluminum matrix after USRT, and the average grain size of the alloy surface is about (25.22 ± 6.46) nm. The improvement of the mechanical properties of the 7B85 alloy after USRT is mainly attributed to the joint action of fine grain strengthening and stress strengthening on the alloy surface.
    • FullText(HTML)
    • References (38)
  • [1]
    HIRSCH J. Recent development in aluminium for automotive applications[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(7): 1995-2002. doi: 10.1016/S1003-6326(14)63305-7
    [2]
    孙德勤, 陈慧君, 文青草, 等. 耐热铝合金的发展与应用[J]. 有色金属科学与工程, 2018, 9(3): 65-69. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201803011
    [3]
    王井井, 黄元春, 刘宇, 等. 时效工艺对Al-Zn-Mg-Cu-Zr-Er铝合金组织与耐腐蚀性影响[J]. 有色金属科学与工程, 2018, 9(2): 47-55. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201802009
    [4]
    MCCULLOUGH R R, JORDON J B, ALLISON P G, et al. Fatigue crack nucleation and small crack growth in an extruded 6061 aluminum alloy[J]. International Journal of Fatigue, 2019, 119: 52-61. doi: 10.1016/j.ijfatigue.2018.09.023
    [5]
    黄晶明, 王昭文, 刘增威, 等. 采用SECM分析7075铝合金的局部腐蚀行为[J]. 有色金属科学与工程, 2019, 10(3): 14-20. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201903003
    [6]
    亓海全, 秦翔智, 孙延焕, 等. 搅拌摩擦修复6061-T4铝合金裂纹的组织和性能[J]. 有色金属科学与工程, 2019, 10(1): 72-76. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201901012
    [7]
    LU K, LU J. Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach[J]. Journal of Materials Science and Technology, 1999, 15(3): 193-197. http://search.cnki.net/down/default.aspx?filename=CLKJ199903000&dbcode=CJFD&year=1999&dflag=pdfdown
    [8]
    KATTOURA M, MANNAVA S R, QIAN D, et al. Effect of ultrasonic nanocrystal surface modification on residual stress, microstructure and fatigue behavior of ATI 718plus alloy[J]. Materials Science and Engineering A, 2018, 711: 364-377. doi: 10.1016/j.msea.2017.11.043
    [9]
    李乐, 路媛媛, 唐峰, 等. 表面纳米化对镍基高温合金焊接液化裂纹的影响[J]. 焊接学报, 2019, 40(1): 151-155. https://www.cnki.com.cn/Article/CJFDTOTAL-HJXB201901030.htm
    [10]
    XU G M, WANG C M, LI Q L, et al. Effects of ultrasonic rolling on surface performance of 7B85-T6 alloy[J]. Materials and Manufacturing Processes, 2020, 35(3): 250-257. doi: 10.1080/10426914.2020.1718701
    [11]
    AMINI S, KARIMAN S A, TEIMOURI R. The effects of ultrasonic peening on chemical corrosion behavior of aluminum 7075[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91: 1091-1102. doi: 10.1007/s00170-016-9795-6
    [12]
    TSAI M T, HUANG J C, TSAI W Y, et al. Effects of ultrasonic surface mechanical attrition treatment on microstructures and mechanical properties of high entropy alloys[J]. Intermetallics, 2018, 93: 113-121. doi: 10.1016/j.intermet.2017.11.018
    [13]
    武永丽, 熊毅, 陈正阁, 等. 超音速微粒轰击对TC11钛合金组织和疲劳性能的影响[J]. 材料工程, 2021, 49(5): 137-143. https://www.cnki.com.cn/Article/CJFDTOTAL-CLGC202105015.htm
    [14]
    SHI X, FENG X, TENG J, et al. Effect of laser shock peening on microstructure and fatigue properties of thin-wall welded Ti-6A1-4V alloy[J]. Vacuum, 2021, 184: 109986. doi: 10.1016/j.vacuum.2020.109986
    [15]
    王春明, 杨牧南, 黄建辉, 等. 镁合金表面自纳米化研究进展及现状[J]. 材料导报, 2019, 33(13): 2260-2265. doi: 10.11896/cldb.18040187
    [16]
    YE H, SUN X, LIU Y, et al. Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy[J]. Surface and Coatings Technology, 2019, 372: 288-298. doi: 10.1016/j.surfcoat.2019.05.035
    [17]
    吴嘉楠, 张柯, 刘平, 等. 纯铜梯度纳米化表面硬质膜的微观结构演化与力学性能研究[J]. 有色金属材料与工程, 2020, 41(6): 16-23. https://www.cnki.com.cn/Article/CJFDTOTAL-SHHA202006003.htm
    [18]
    袁俊瑞, 徐佳, 周振宇, 等. 滚压诱导纯铜表面梯度纳米结构磨损行为研究[J]. 机械工程学报, 2017, 53(24): 49-54. https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201724006.htm
    [19]
    CHEN C, CHEN F, ZHANG H. Surface nanocrystallization of 7A52 aluminum alloy welded joint by aging and ultrasonic impact compound treatment[J]. Rare Metal Materials and Engineering, 2018, 47(9): 2637-2641. doi: 10.1016/S1875-5372(18)30201-7
    [20]
    LI L, KIM M, LEE S, et al. Study on surface modification of aluminum 6061 by multiple ultrasonic impact treatments[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96: 1255-1264. doi: 10.1007/s00170-018-1666-x
    [21]
    LIU Y, JIN B, LU J. Mechanical properties and thermal stability of nanocrystallized pure aluminum produced by surface mechanical attrition treatment[J]. Materials Science and Engineering A, 2015, 636: 446-451. doi: 10.1016/j.msea.2015.03.068
    [22]
    CHANG H W, KELLY P M, SHI Y N, et al. Effect of eutectic Si on surface nanocrystallization of Al-Si alloys by surface mechanical attrition treatment[J]. Materials Science and Engineering A, 2011, 530: 304-314. doi: 10.1016/j.msea.2011.09.090
    [23]
    VAIBHAV P, CHATTOPADHYAY K, SANTHI SRINIVAS N C, et al. Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminium alloy[J]. International Journal of Fatigue, 2017, 103: 426-435. doi: 10.1016/j.ijfatigue.2017.06.033
    [24]
    丛家慧, 王磊. 超声喷丸表面强化技术的研究现状与应用进展[J]. 机械工程材料, 2019, 43(5): 1-5. https://www.cnki.com.cn/Article/CJFDTOTAL-GXGC201905001.htm
    [25]
    YANG B, TAN C, ZHAO Y, et al. Influence of ultrasonic peening on microstructure and surface performance of laser-arc hybrid welded 5A06 aluminum alloy joint[J]. Journal of Materials Research and Technology, 2020, 9(5): 9576-9587. doi: 10.1016/j.jmrt.2020.06.057
    [26]
    XU X C, LIU D X, ZHANG X H, et al. Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy[J]. International Journal of Fatigue, 2019, 125: 237-248. doi: 10.1016/j.ijfatigue.2019.04.005
    [27]
    孙智妍, 张雲飞, 赵秀娟, 等. 电脉冲对GH4169超声滚压表面性能的影响[J]. 兵器材料科学与工程, 2021, 44(3): 33-38. https://www.cnki.com.cn/Article/CJFDTOTAL-BCKG202103009.htm
    [28]
    WANG H, NING C, HUANG Y, et al. Improvement of abrasion resistance in artificial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening[J]. Optics and Lasers in Engineering, 2017, 90: 179-185. doi: 10.1016/j.optlaseng.2016.10.016
    [29]
    YANG Y, LIAN X, ZHOU K, et al. Effects of laser shock peening on microstructures and properties of 2195 Al-Li alloy[J]. Journal of Alloys and Compounds, 2019, 781: 330-336. doi: 10.1016/j.jallcom.2018.12.118
    [30]
    KIM S H, PARK S H. Influence of Ce addition and homogenization temperature on microstructural evolution and mechanical properties of extruded Mg-Sn-Al-Zn alloy[J]. Materials Science and Engineering A, 2016, 676: 232-240. doi: 10.1016/j.msea.2016.08.093
    [31]
    ZHAO C, PAN F, ZHAO S, et al. Preparation and characterization of as-extruded Mg-Sn alloys for orthopedic applications[J]. Materials and Design, 2015, 70: 60-67. doi: 10.1016/j.matdes.2014.12.041
    [32]
    WANG C, XU G, ZENG L, et al. Enhanced corrosion behavior and mechanical properties of Al-Zn-Mg-Cu sheet alloy by ultrasonic surface rolling treatment[J]. Materials Science and Engineering A, 2020, 51: 1967-1971.
    [33]
    ZHANG Y, JIN S, TRIMBY P W, et al. Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion[J]. Acta Materialia, 2019, 162: 19-32. doi: 10.1016/j.actamat.2018.09.060
    [34]
    SUN Q, HAN Q, XU R, et al. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: Corrosion depth vs. impact energy[J]. Corrosion Science, 2018, 130: 218-230. doi: 10.1016/j.corsci.2017.11.008
    [35]
    PANDEY V, SINGH J K, CHATTOPADHYAY K, et al. Influence of ultrasonic shot peening on corrosion behavior of 7075 aluminum alloy[J]. Journal of Alloys and Compounds, 2017, 723: 826-840. doi: 10.1016/j.jallcom.2017.06.310
    [36]
    CULLITY B D. Elements of X-ray diffraction[J]. American Journal of Physics, 1957, 25(6): 394-395. doi: 10.1119/1.1934486
    [37]
    尹文红, 王卫国, 方晓英. 高纯铝中晶界特征分布对变形及退火行为的影响[J]. 热加工工艺, 2017, 46(24): 245-247. https://www.cnki.com.cn/Article/CJFDTOTAL-SJGY201724070.htm
    [38]
    GAO H J, HUANG Y, NIE W D, et al. Mechanism-based strain gradient plasticity - I. Theory[J]. Journal of the Mechanics and Physics of Solids, 1999, 47(6): 1239-1263. doi: 10.1016/S0022-5096(98)00103-3
    • Related Articles

  • Related Articles

    [1]FAN Wenxin, GAO Yang, WANG Pengfei, CHEN Yan, YUAN Xia, PENG Lijun, FU Yabo, ZHANG Zhongtao. Effect of Ni and Si additions on the microstructure and mechanical properties of Cu-7Sn alloy[J]. Nonferrous Metals Science and Engineering, 2025, 16(1): 85-95. DOI: 10.13264/j.cnki.ysjskx.2025.01.010
    [2]MAO Pengyan, ZHAO Hui, LI Hongda. Effect of Al content on microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys[J]. Nonferrous Metals Science and Engineering, 2024, 15(6): 867-876. DOI: 10.13264/j.cnki.ysjskx.2024.06.010
    [3]FENG Tian, KONG Jian, ZHANG Yong, ZHAO Yonghao. The effects of cold rolling thickness reduction and path on the microstructure and mechanical properties of NiCoCr alloy[J]. Nonferrous Metals Science and Engineering, 2024, 15(2): 212-219. DOI: 10.13264/j.cnki.ysjskx.2024.02.008
    [4]ZHU Wenjia, ZHAO Zhongmei, LONG Dengcheng, ZHANG Xin, QIN Junhu, LU Hongbo. Study on microstructure and properties of SnBi36Ag0.5Sbx solder alloy[J]. Nonferrous Metals Science and Engineering, 2023, 14(4): 536-542. DOI: 10.13264/j.cnki.ysjskx.2023.04.012
    [5]XIE Fanghao, LI Jianan, DENG Shenghua, LI Weirong. The microstructure and mechanical properties of selective laser melted Al-Zn-Mg-Sc alloy[J]. Nonferrous Metals Science and Engineering, 2022, 13(4): 61-69. DOI: 10.13264/j.cnki.ysjskx.2022.04.008
    [6]QUAN Yongqi, CHENG Hanming, WANG Herui, ZHAO Yao, LIN Gaoyong. Effects of heat treatment on the microstructure and mechanical properties of die casting AlSi10MnMg alloy[J]. Nonferrous Metals Science and Engineering, 2022, 13(2): 98-106. DOI: 10.13264/j.cnki.ysjskx.2022.02.014
    [7]XU Chunting, GUO Fanghe, ZHANG Hui, WU Ying, WANG Richu, CAI Zhiyong. Microstructure and properties of spray deposited Al-12Si-0.6Mg alloy[J]. Nonferrous Metals Science and Engineering, 2021, 12(2): 43-49. DOI: 10.13264/j.cnki.ysjskx.2021.02.006
    [8]XIE Weicheng, TAO Li, ZHONG Minglong, LIU Renhui, NI Gang, HU Xianjun, ZHONG Zhenchen. Structure and magnetic properties of TbCu7-type SmCo7-xHfx alloys[J]. Nonferrous Metals Science and Engineering, 2019, 10(5): 101-105. DOI: 10.13264/j.cnki.ysjskx.2019.05.016
    [9]LUO Haiyun, KUANG Quanbo, WANG Richu. Microstructure and mechanical properties of spray deposited Al-Mg-Li Alloy[J]. Nonferrous Metals Science and Engineering, 2019, 10(4): 66-71. DOI: 10.13264/j.cnki.ysjskx.2019.04.011
    [10]HUANG Lihua, ZHANG Tao, ZHANG Xiaobo. Effects of heat treatment and extrusion on the microstructures and mechanical properties of WE53 magnesium alloy[J]. Nonferrous Metals Science and Engineering, 2014, 5(6): 67-70. DOI: 10.13264/j.cnki.ysjskx.2014.06.011

  • Cited by

    Periodical cited type(4)

    1. 夏天成，杨晓峰，邵照宇，孙凯，李晓，王继，刘怡心，陈浩. 超声滚压工艺对镍基单晶高温合金DD6表面完整性和疲劳寿命的影响. 表面技术. 2024(01): 182-191 .
    2. 贾琦，杜东兴，孔金星，刘思来，彭照波，杨全威. 超声滚压工艺参数对45钢表面完整性与冲击性能的影响. 机械工程材料. 2024(10): 28-34 .
    3. 谢尚恒，孙有平，朱嘉欣，方德俊. 微量Zr对深冷轧制Al-Cu-Mg合金微观组织及性能的影响. 金属热处理. 2023(09): 174-180 .
    4. 饶楚楚，兰叶深. 表面超声滚压参数对轴承套圈表面性能的影响. 内燃机与配件. 2022(24): 103-105 .

    Other cited types(4)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (108) PDF downloads (6) Cited by(8)
    Related

    Copyright © 2010 Editorial Department of Nonferrous Metals Science and Engineering All rights reserved

    Address：11th floor, bishop building, University of science and technology, No. 86, Hongqi Avenue, Ganzhou City, Jiangxi Province  Tel：0797-8312555

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return