Abstract:
The
Camellia oleifera seed residues were used as the raw material to investigate the catalytic effect of industrial waste vanadium-based catalysts on its pyrolysis behavior. Thermogravimetric analysis (TGA) and a fixed-bed reactor experiments were conducted to elucidate the reaction mechanism of the catalytic pyrolysis process and optimize the operating conditions. The TGA results indicate that the catalytic pyrolysis of
Camellia oleifera seed residues mainly occur within the temperature range of 200-400 ℃, while the catalyst exerted only a marginal influence on the thermogravimetric (TG) profile of the residues. The fitting results of the Coats-Redfern (CR) equation indicate that the catalytic pyrolysis process conforms to the first-order chemical reaction model, within the activation energy (
Ea) range of 100.28-102.75 kJ/mol, and the pre-exponential factor (
A) of (1.28×10
8-2.15×10
8)/min. The effects of catalyst content, reaction temperature and reaction time on product distribution during catalytic pyrolysis process were systematically investigated. The results show that under optimal reaction conditions (catalyst content 20%, pyrolysis temperature 500 ℃, heating rate 10 ℃/min and reaction time 1 h), the liquid yield reaches 47.76%, while the gas and solid yields are 24.64% and 27.60%, respectively. CO, CO
2 and CH
4 are the predominant gaseous products, while the bio-oil mainly consisted of ketones, phenols and hydrocarbons. In particular, the significant increase in hydrocarbon content suggests that vanadium-based catalysts enhance both tar yield and quality of the tar. The findings provide a theoretical basis for the synergistic resource utilization of industrial waste vanadium-based catalysts and agricultural waste.