Citation: | XIE Li-ting. Rapid Test of Co Element in Cobalt Oxalate by Potential Titration Method[J]. Nonferrous Metals Science and Engineering, 2006, 20(4): 43-45. |
[1] |
余志英.普通化学常用数据表[M].北京:石油工业出版社, 1959:54-56.
|
[1] | ZHAO Zhilian, WANG Dan, LAI Jian, CHEN Tao, LIU Hong. Method improvement on the determination of zinc content in zinc concentrate[J]. Nonferrous Metals Science and Engineering, 2020, 11(3): 105-108. DOI: 10.13264/j.cnki.ysjskx.2020.03.014 |
[2] | HAN Xiuxiu, ZHANG Tingan, LYU Guozhi, PAN Xijuan. A comparative study of alumina prepared from aluminum chloride solution by electrotransformation method and by sodium hydroxide titration method[J]. Nonferrous Metals Science and Engineering, 2019, 10(4): 16-21. DOI: 10.13264/j.cnki.ysjskx.2019.04.003 |
[3] | Ma Ziyang, Yan Baijun. A method for detecting vanadium (V)in stone coal and the law of its alkaline leaching[J]. Nonferrous Metals Science and Engineering, 2018, 9(1): 45-50. DOI: 10.13264/j.cnki.ysjskx.2018.01.008 |
[4] | CHEN Ming, CAI Zhongping, XIONG Linyuan, CAI Qingyun, XU Hui. Experimental study on zinc precipitation by potential regulation-sulfide precipitation[J]. Nonferrous Metals Science and Engineering, 2014, 5(3): 81-85. DOI: 10.13264/j.cnki.ysjskx.2014.03.015 |
[5] | ZENG Ji-ping. On the Uncertainty Evaluation of Yttria Content by EDTA Titration[J]. Nonferrous Metals Science and Engineering, 2009, 23(2): 46-48. |
[6] | CHEN Jin-feng. Determination of Pb, Zn in High Content Core Samples by Trace Titration Method with EDTA[J]. Nonferrous Metals Science and Engineering, 2007, 21(2): 37-39. |
[7] | OU Li-ling. The EDTA Volumetric Method for the Determination of Calcium Content[J]. Nonferrous Metals Science and Engineering, 2007, 21(1): 38-39. |
[8] | XIAO Yong, XUE Xiang-bing. Determination of Ammonium in Cobalt Carbonate with Ammonium Reagent Photometric Method[J]. Nonferrous Metals Science and Engineering, 2004, 18(2): 46-48. |
[9] | SHI Ying-bing. Rapid Test Microcontent Se in Oscillographic Polarographic Method[J]. Nonferrous Metals Science and Engineering, 2003, 17(2): 38-40. |