Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
ZHOU Genming, HU Jianzhao, DUAN Yongxiang. Research on optimization of mining method of a phosphate mine[J]. Nonferrous Metals Science and Engineering, 2019, 10(3): 81-85. DOI: 10.13264/j.cnki.ysjskx.2019.03.014
Citation: ZHOU Genming, HU Jianzhao, DUAN Yongxiang. Research on optimization of mining method of a phosphate mine[J]. Nonferrous Metals Science and Engineering, 2019, 10(3): 81-85. DOI: 10.13264/j.cnki.ysjskx.2019.03.014

Research on optimization of mining method of a phosphate mine

More Information
  • Received Date: April 08, 2019
  • Published Date: June 29, 2019
  • A phosphate mine is a new underground mining mine, which belongs to a gently inclined medium thick ore body. The original design used the upward horizontal stratification filling method and the upward approach filling method for mining. In view of the large amount of cutting work, complex process, poor safety, low production capacity and high labor intensity, it is difficult to meet the requirement of 5 million t/a production capacity in the mine. Through a comprehensive study of mining technical conditions and actual mining production, it is determined that the layout of the mining area is adopted, and the pre-control of the middle and deep hole empty field is followed by the method of filling and filling mining and the mining method of the excavation machine. The mining operation is carried out using large-scale trackless equipment. After optimization, the cutting project was reduced, the mining process was simplified, the operating conditions were improved, and the labor intensity of workers was reduced.
  • [1]
    刘哲, 金晓刚, 刘培正.缓倾斜中厚至厚矿体采矿方法探讨[J].现代矿业, 2014, 540(4):20-21. doi: 10.3969/j.issn.1674-6082.2014.04.005
    [2]
    谢成彬.上下盘均不稳固缓倾斜中厚矿体采矿方法研究[J].中国矿山工程, 2011, 40(2):3-4. doi: 10.3969/j.issn.1672-609X.2011.02.003
    [3]
    李兴尚, 吴法春, 许家林.上向水平分层充填采矿法的优化研究[J].金属矿山, 2006, 358(4):1-3. http://d.old.wanfangdata.com.cn/Periodical/jsks200604001
    [4]
    陈五九, 刘发平, 张钦礼.预控顶上向进路充填法在白象山铁矿的应用[J].现代矿业, 2016, 32(9):59-62. doi: 10.3969/j.issn.1674-6082.2016.09.016
    [5]
    谢文杰, 王宜勇, 孔详业.缓倾斜中厚矿体采矿方法实验与应用[J].黄金, 2012, 8(33):25-27. http://cdmd.cnki.com.cn/Article/CDMD-10533-2006037972.htm
    [6]
    曾广辉, 罗佳.香炉山钨矿缓倾斜中厚矿体采矿方法选择[J].采矿技术, 2015, 15(4):1-4. doi: 10.3969/j.issn.1671-2900.2015.04.001
    [7]
    王德州.琅琊山铜矿上向水平分层尾砂充填采矿法及其优化[J].采矿技术, 2011(5):3-4. doi: 10.3969/j.issn.1671-2900.2011.05.002
    [8]
    王新民, 曹刚, 张钦礼, 等.康家湾矿深部难采矿体采场稳定性及结构参数优化研究[J].河南理工大学学报(自然科学版), 2007, 26(6):634-640. doi: 10.3969/j.issn.1673-9787.2007.06.007
    [9]
    赵兴宽, 郭蕊.矿岩稳定性对缓倾斜中厚矿体采矿方法选择的影响[J].采矿技术, 2015, 15(1):15-17. http://d.old.wanfangdata.com.cn/Periodical/caikjs201506007
    [10]
    姜群, 刘吉兴, 童意章, 等.锡矿山南矿缓倾斜中厚矿体采矿方法实践[J].采矿技术, 2013, 1(1):9-11. doi: 10.3969/j.issn.1671-9816.2013.01.005
    [11]
    王发清, 刘志国.缓倾斜中厚矿体采矿方法优化选择[J].采矿技术, 2009, 9(5):4-5. http://d.old.wanfangdata.com.cn/Periodical/caikjs200905002
    [12]
    李安平, 刘洋树, 皇甫风成, 等.破碎围岩矿体预控顶分段空场嗣后充填法的研究与实践[J].矿业研究与开发, 2014(2):13-17. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=kyyjykf201401001
    [13]
    仵锋锋.分段崩矿阶段空场嗣后充填采矿法采场结构参数的数值模拟研究[J].采矿技术, 2015, 9(5):9-12. doi: 10.3969/j.issn.1671-2900.2015.05.004
    [14]
    徐广举, 姚金蕊, 李夕兵, 等.基于悬臂式掘进机的采矿方法研究[J].矿业研究与开发, 2010, 10:1-13. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=kyyjykf201005001
    [15]
    周伟永, 饶运章, 汪弘, 等.基于FLAC3D的采场稳固性数值模拟研究[J].矿业研究与开发, 2014(2):1-4. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=kyyjykf201402005
    [16]
    吴贤振, 饶运章. FLAC3D软件在优化深部高硫高品位矿体采场结构参数中的应用[J].有色金属(矿山部分), 2004, 56(6):13-15. doi: 10.3969/j.issn.1671-4172.2004.06.005
    [17]
    叶海旺, 常剑, 周磊.基于FLAC3D的采场结构参数优化[J].金属矿山, 2010(12):6-8. http://d.old.wanfangdata.com.cn/Periodical/jsks201012002
    [18]
    赵奎, 邵海, 徐峰, 等.某铜矿不同采矿进路布置开采稳定性数值模拟[J].有色金属科学与工程, 2013, 4(2):46-50. http://d.old.wanfangdata.com.cn/Periodical/jxysjs201302011
    [19]
    修雷, 乔木, 李志军, 等.缓倾斜中厚矿体开采方法研究[J].有色金属(矿山部分), 2011, 63(2):8-10. doi: 10.3969/j.issn.1671-4172.2011.02.003
    [20]
    彭康.中厚倾斜破碎磷矿体开采方法研究与应用[D].长沙: 中南大学, 2010. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=Y1914810
    [21]
    吴启海, 周礼, 赵国彦.缓倾斜中厚矿体房柱嗣后充填采矿法实践[J].化工矿物与加工, 2013(12):43-45. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgkwyjg201312013
  • Related Articles

    [1]GUO Ziting, HUANG Jinchao, XIAO Qingmei, ZHONG Shengwen. Effect of composite conductive agent consisting of graphene and Super-P carbon black on the performance of LiNi0.5Co0.2Mn0.3O2 lithium-ion battery[J]. Nonferrous Metals Science and Engineering, 2023, 14(2): 227-234. DOI: 10.13264/j.cnki.ysjskx.2023.02.009
    [2]ZHU Da-chang, YAN Zhi-min, CUI Xiang-fu, LI Pei. The position analysis and control simulation of 3-RPS parallel robot[J]. Nonferrous Metals Science and Engineering, 2012, 3(1): 95-100. DOI: 10.13264/j.cnki.ysjskx.2012.01.005
    [3]WANG Ya-jie. The Application of New Hoisting Instruments in the Upside -down Mounting of Large Precipitation Tanks[J]. Nonferrous Metals Science and Engineering, 2010, 24(3-4): 174-178.
    [4]HU Shi-bo. On the Installation of Large-scaled Steam Drier[J]. Nonferrous Metals Science and Engineering, 2008, 22(3): 45-48.
    [5]DU Wen. Function of Safety Testing of Mine Equipments in Safety Production Management[J]. Nonferrous Metals Science and Engineering, 2008, 22(3): 39-41.
    [6]CUI Dong-liang, LI Xi-bing, ZHAO Guo-ya. Analysis of the Numerical Simulation to Structure Parameter of Hard-To-Mine Ore Body in Xincheng Gold Mine[J]. Nonferrous Metals Science and Engineering, 2006, 20(3): 13-17.
    [7]ZHAO Yu-dong. New Development of Trackless Excavating Equipments in Foreign Underground Mines[J]. Nonferrous Metals Science and Engineering, 2005, 19(3): 33-36.
    [8]WAN Shi-yi. Application of large Emptied Area Mining Method in Deep Deposit[J]. Nonferrous Metals Science and Engineering, 2005, 19(1): 26-28.
    [9]ZHAO Yu-dong. Emission Pollution and Control Technology of the Diesel Equipment of Underground Mine[J]. Nonferrous Metals Science and Engineering, 2002, 16(1): 19-22.
    [10]ZHAO Yu-dong. The development history of drilling equipment of underground mine[J]. Nonferrous Metals Science and Engineering, 2001, 15(2): 7-10.

Catalog

    Article Metrics

    Article views (3343) PDF downloads (9) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return