Founded in 1987, Bimonthly
Supervisor:Jiangxi University Of Science And Technology
Sponsored by:Jiangxi University Of Science And Technology
Jiangxi Nonferrous Metals Society
ISSN:1674-9669
CN:36-1311/TF
CODEN YJKYA9
LIAO Jianjun, MA Peng, GUAN Pingping, ZHANG Yanhe. Reducing production cost in RH and LF processes[J]. Nonferrous Metals Science and Engineering, 2018, 9(5): 49-53, 96. DOI: 10.13264/j.cnki.ysjskx.2018.05.009
Citation: LIAO Jianjun, MA Peng, GUAN Pingping, ZHANG Yanhe. Reducing production cost in RH and LF processes[J]. Nonferrous Metals Science and Engineering, 2018, 9(5): 49-53, 96. DOI: 10.13264/j.cnki.ysjskx.2018.05.009

Reducing production cost in RH and LF processes

More Information
  • Received Date: May 26, 2018
  • Published Date: October 30, 2018
  • In this paper, the limited links of RH smelting cycle and the factors in high electricity and electrode consumption of LF per ton steel were investigated. The average smelting period of RH reduced from 34 minutes to 28.3 minutes, with a capacity of 15000 tons per month, through ladle covering in all processes, changes of feeding mode of silicon steel, improvement in the heating effect of the new ladle, optimization of decarburization process, electric gear position and amount of slag addition. The electrode consumption of LF furnace reduced from 0.37 kg/t to 0.29 kg/t, and electricity consumption reduced by 5.36 kwh/t per ton steel. As a result, favorable economic benefits were achieved with the direct economic benefit of 19.6693 million yuan.
  • [1]
    孙翠华, 李广艳, 崔凯, 等.钢水过程温度控制技术的研究与实践[J].宽厚板, 2013, 19(5):22-25. doi: 10.3969/j.issn.1009-7864.2013.05.007
    [2]
    常金宝, 李双武, 马德刚, 等.唐钢转炉低温出钢技术[J].炼钢, 2012, 28(5):8-12. http://d.old.wanfangdata.com.cn/Periodical/lg201205003
    [3]
    王尖锐.转炉出钢温度控制技术的研究与实践[J].世界钢铁, 2013(4):46-49. doi: 10.3969/j.issn.1672-9587.2013.04.009
    [4]
    孙晓辉, 左康林, 唐洪东, 等.一炼钢转炉出钢温降的影响因素分析[J].梅山科技, 2013(2):49-42. http://www.cnki.com.cn/Article/CJFDTOTAL-MSKJ201302021.htm
    [5]
    贺东风, 徐安军, 吴鹏飞, 等.炼钢厂钢包热状态跟踪模型[J].北京科技大学学报.2011, 33(1):110-115. http://d.old.wanfangdata.com.cn/Periodical/bjkjdxxb201101020
    [6]
    邓丽君, 张国栋, 姜威, 等.钢包烘烤器蓄热式改造的数值分析[J].钢铁, 2010, 45(5):931. http://d.old.wanfangdata.com.cn/Periodical/gt201005021
    [7]
    田乃媛, 梁柏勇, 景财良, 等.迁钢210钢包烘烤过程热测试[J].冶金能源, 2009, 28(6):54. doi: 10.3969/j.issn.1001-1617.2009.06.017
    [8]
    刘正华, 尹卫平, 汤晓辉, 等.降低转炉出钢温度的实践[J].山东冶金, 2010, 32(3):27-28. doi: 10.3969/j.issn.1004-4620.2010.03.009
    [9]
    左都伟.降低转炉出钢温度的探索与实践[J].湖南冶金, 2003, 31(2):32-35. doi: 10.3969/j.issn.1005-6084.2003.02.007
    [10]
    邱钰杰, 虞澜.攀钢RH脱硫工艺分析[J].钢铁研究, 2011, 39(3):39-42. http://d.old.wanfangdata.com.cn/Periodical/gtyj201103012
    [11]
    张国兴.攀钢超低碳钢深脱硫实验研究[D].重庆: 重庆大学, 2010. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=D279046
    [12]
    李应江, 包燕平.120tLD-RH-LF CSP流程生产W600无取向硅钢的工艺时间[J].特殊钢, 2008, 29(6):34-36. doi: 10.3969/j.issn.1003-8620.2008.06.013
    [13]
    何保堂, 翁玉娟, 王立军, 等.降低LF炉石墨电极消耗实践[J].河北冶金, 2016(248):67-69. http://d.old.wanfangdata.com.cn/Periodical/sdyj201203021
    [14]
    赵圣功, 孙翠华, 卢乃双, 等.莱钢降低LF炉石墨电极消耗实践[J].山东冶金, 2016, 34(3):53-54. doi: 10.3969/j.issn.1004-4620.2016.03.025
    [15]
    席晓丽, 冯慧霄, 周晓红, 等.唐钢150tLF炉电极消耗的分析与实践[J].河北冶金, 2011, 11(191):75-77. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hbyj201111027
    [16]
    蔡峻, 汪红兵, 徐安军, 等.炼钢厂钢包红包出钢率的影响因素仿真[J].钢铁研究学报, 2014, 16(1):27-32. http://d.old.wanfangdata.com.cn/Periodical/gtyjxb201401006
    [17]
    吕长海, 薛俊玺, 尹崇丽, 等.转炉炼钢系统温度控制技术的研究[J].莱钢科技, 2010(8):55-57. http://kns.cnki.net/KCMS/detail/detail.aspx?filename=LGKI201004025&dbname=CJFD&dbcode=CJFQ
    [18]
    赵文利.LF钢包精炼炉电极控制的研究与应用[D].沈阳: 东北大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10145-1013116349.htm
  • Related Articles

    [1]LAI Dan, YANG Hua, LUO Xiang. Influence of economic policy uncertainty on operating efficiency——with listed companies in the non-ferrous metal industry as the case[J]. Nonferrous Metals Science and Engineering, 2020, 11(4): 98-105. DOI: 10.13264/j.cnki.ysjskx.2020.04.015
    [2]QIU Sha, GUO Pengzhi, KANG Weigang, WU Yipeng. Economic analysis of mineral processing selection of Phatem gold deposite in Laos[J]. Nonferrous Metals Science and Engineering, 2015, 6(6): 95-98. DOI: 10.13264/j.cnki.ysjskx.2015.06.017
    [3]QIU Moqing, DENG Tongfa. Technical and economical analysis on the treatment programs of soft soil foundation[J]. Nonferrous Metals Science and Engineering, 2014, 5(3): 96-101. DOI: 10.13264/j.cnki.ysjskx.2014.03.018
    [4]JIA Jing-hua. On the Factors Affecting Antimony Blasting Furnace's Volatility Smelting Economic Indexes[J]. Nonferrous Metals Science and Engineering, 2010, 1(01): 43-44.
    [5]LIU Rong-jun, FAN Feng. Associated Silver Enrichment Regulation and Exploration Significance of Jiangxi Baoshan Poly-metallic Ore Deposit[J]. Nonferrous Metals Science and Engineering, 2009, 23(3): 1-4.
    [6]LI Xian-ming. On the Economic Operation of Jiangxi Nonferrous Metal Industry[J]. Nonferrous Metals Science and Engineering, 2008, 22(2): 3-6.
    [7]LI Wen-bing. Discussion on the Quality and Efficiency of Road Engineering for Large-scale Open-pit Mine[J]. Nonferrous Metals Science and Engineering, 2004, 18(4): 28-30.
    [8]MIAO Jian-hua. A practice on increasing the economic benefits of ore processing in Yongping copper mine[J]. Nonferrous Metals Science and Engineering, 2000, 14(3): 17-19.
  • Cited by

    Periodical cited type(3)

    1. 罗国健,孙有平,何江美,刘华燊,罗章. 热处理对高真空压铸AlSi10MnMg合金拉伸性能的影响. 机械工程材料. 2024(04): 44-50 .
    2. 祁妙,陈存广,孙春芳,李鑫,杨芳,刘其源,刘新华,郭志猛. 不同Mg/Li比对粉末冶金Al–Mg–Li合金显微组织及力学性能的影响. 航空制造技术. 2024(17): 59-67 .
    3. 全泳琪,程汉明,王鹤睿,赵耀,林高用. 热处理对压铸AlSi10MnMg合金组织和力学性能的影响. 有色金属科学与工程. 2022(02): 98-106 . 本站查看

    Other cited types(1)

Catalog

    Article Metrics

    Article views (64) PDF downloads (2) Cited by(4)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return