Li-rich manganese layered cathode materials doped with W

LIU Zhiliang; LI Xiaolin; LEI Chao; LI Dong; WANG Chunxiang; CHEN Jingbo; ZHONG Shengwen

doi:10.13264/j.cnki.ysjskx.2020.06.008

Volume 11 Issue 6

Dec. 2020

Turn off MathJax

Article Contents

Abstract

References

Nonferrous Metals Science and Engineering > 2020 > 11(6): 57-63. > DOI: 10.13264/j.cnki.ysjskx.2020.06.008

LIU Zhiliang, LI Xiaolin, LEI Chao, LI Dong, WANG Chunxiang, CHEN Jingbo, ZHONG Shengwen. Li-rich manganese layered cathode materials doped with W[J]. Nonferrous Metals Science and Engineering, 2020, 11(6): 57-63. DOI: 10.13264/j.cnki.ysjskx.2020.06.008

Citation:

PDF (2410 KB)

Li-rich manganese layered cathode materials doped with W

1.
Faculty of Materials Metallurgy and Chemistry, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China
2.
School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550025, China

More Information

Received Date: July 19, 2020
Published Date: December 30, 2020

Graphical Abstract

Abstract

Abstract

Lithium-rich manganese materials have high specific capacity and charge-discharge voltage platform, but large irreversible capacity. The bonding between transition metals and oxygen was enhanced by W doping in lithium-rich manganese cathode materials, with inhibited lattice oxygen shedding during the first charge-discharge process. Meanwhile, XRD refinement results showed that W-doping increased the interlayer spacing of lithium-rich manganese layered materials, promoted the diffusion of lithium ions, reduced the electrochemical impedance of materials, with an effective improvement of the cycle stability and rate performance of materials. Electrochemical tests show that the performance is the most favorable when W is doped at 3%, and the discharge specific capacities at 0.2 C, 3 C and 5 C are 211.3 mAh/g, 132.6 mAh/g and 114.61 mAh/g, respectively, which are 10.5%, 7.8% and 12.58% higher than those of undoped lithium-rich manganese materials.
- layered cathode,
- doping,
- low impedance,
- cyclic stability

FullText(HTML)

References (24)

References

[1]	HU M, PANG X L, ZHOU Z. Recent progress in high-voltage lithium ion batteries[J]. Journal of Power Sources, 2013, 237: 229-242. doi: 10.1016/j.jpowsour.2013.03.024
[2]	曾敏, 钟盛文, 张骞, 等.富锂锰基正极材料动力锂离子电池的倍率性能[J].电池, 2015, 45(1): 18-21. https://www.cnki.com.cn/Article/CJFDTOTAL-DACI201501007.htm
[3]	HU G R, XUE Z C, LUO Z Y, et al. Improved cycling performance of CeO₂-inlaid Li-rich cathode materials for lithium-ion battery[J]. Ceramics International, 2019, 45(8): 10633-10639. http://www.sciencedirect.com/science/article/pii/S027288421930433X
[4]	TAI Z, ZHU W, SHI M, et al. Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li₃PO₄ as cathode material for Lithium-ion batteries[J]. Journal of Colloid and Interface Science, 2020, 576: 468-475. doi: 10.1016/j.jcis.2020.05.015
[5]	ZHU Y, ZHANG N, ZHAO L, et al. Improving electrochemical performance of lithium-rich cathode material Li_1.2Mn_0.52Ni_0.13Co_0.13W_0.02O₂ coated with Li₂WO₄ for lithium ion batteries[J]. Journal of Alloys and Compounds, 2019, 811: 152023. doi: 10.1016/j.jallcom.2019.152023
[6]	程波明, 杨金猛, 刘宝禄, 等.烧结温度对LiNi_0.8Co_0.15Al_0.05O₂结构和电化学性能的影响[J].有色金属科学与工程, 2018, 9(4): 47-52. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201804008
[7]	ZHANG Y Z, LIU Z H, WANG Z, et al. Electrochemical impedance spectroscopy study of lithium-rich material 0.5Li₂ MnO₃·0.5Li Ni_1/3Co_1/3Mn_1/3O₂ in the first two charge-discharge cycles[J]. Electrochimica Acta, 2019, 310: 136-145. doi: 10.1016/j.electacta.2019.04.112
[8]	李栋, 雷超, 赖华, 等.全固态锂离子电池正极与石榴石型固体电解质界面的研究进展[J].无机材料学报, 2019, 34(7): 694-702. https://www.cnki.com.cn/Article/CJFDTOTAL-WGCL201907002.htm
[9]	TAI Z G, LI X L, ZHU W, et al. Nonstoichiometry of Li-rich cathode material with improved cycling ability for lithium-ion batteries[J]. Journal of Colloid and Interface Science, 2020, 570: 264-272. doi: 10.1016/j.jcis.2020.03.005
[10]	CHEN G R, AN J, MENG Y M, et al. Cation and anion Co-doping synergy to improve structural stability of Li- and Mn-rich layered cathode materials for lithium-ion batteries[J]. Nano Energy, 2019, 57: 157-165. http://www.sciencedirect.com/science/article/pii/S2211285518309625
[11]	ZOU W, XIA F J, SONG J P, et al. Probing and suppressing voltage fade of Li-rich Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ cathode material for lithium-ion battery[J]. Electrochimica Acta, 2019, 318: 875-882. doi: 10.1016/j.electacta.2019.06.119
[12]	李栋, 赖华, 罗诗健, 等.富锂锰基层状正极材料的表面包覆改性[J].硅酸盐学报, 2017, 45(7): 904-915. https://www.cnki.com.cn/Article/CJFDTOTAL-GXYB201707004.htm
[13]	SHI S J, TU J P, MAI Y J, et al. Effect of carbon coating on electrochemical performance of Li_1.048Mn_0.381Ni_0.286Co_0.286O₂ cathode material for lithium-ion batteries[J]. Electrochimica Acta, 2012, 63(63): 112-117.
[14]	钟盛文, 梅文捷, 李栋, 等.富锂正极材料Li_1+x[Ni_0.36Mn_0.64]_(1-x)O₂的制备及电化学性能研究[J].材料导报, 2015, 29(12): 10-14. https://www.cnki.com.cn/Article/CJFDTOTAL-CLDB201512003.htm
[15]	LI M, WANG H Y, ZHAO L M, et al. Improving the electrochemical performance of lithium-rich oxide layer material with Mg and La co-doping[J]. Journal of Alloys and Compounds, 2019, 782: 451-460. doi: 10.1016/j.jallcom.2018.12.072
[16]	DONG S D, ZHOU Y, HAI C X, et al. Understanding electrochemical performance improvement with Nb doping in lithium-rich manganese-based cathode materials[J]. Journal of Power Sources, 2020, 462: 228185. doi: 10.1016/j.jpowsour.2020.228185
[17]	XU M, CHEN Z Y, ZHU H L, et al. Mitigating capacity fade by constructing highly ordered mesoporous Al₂O₃/polyacene double-shelled architecture in Li-rich cathode materials[J]. Journal of Materials Chemistry A, 2015, 3(26): 13933-13945. http://pubs.rsc.org/en/content/articlepdf/2015/ta/c5ta03676c
[18]	邱世涛, 钟盛文, 李婷婷, 等. Cu掺杂LiNi_0.6Co_0.2Mn_0.2O₂的电化学性能[J].有色金属科学与工程, 2018, 9(5): 21-25. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201805005
[19]	KIM J H, PARK M S, SONG J H, et al. Effect of aluminum fluoride coating on the electrochemical and thermal properties of 0.5Li₂MnO₃·0.5LiNi_0.5Co_0.2Mn_0.3O₂ composite material[J]. Journal of Alloys and Compounds, 2012, 517: 20-25. http://www.sciencedirect.com/science/article/pii/S0925838811022043
[20]	兰超波, 张骞, 邱世涛, 等. LiNi_0.5Co_0.2Mn_0.3O₂正极材料的高电压研究[J].有色金属科学与工程, 2019, 10(4): 72-77. http://ysjskx.paperopen.com/oa/DArticle.aspx?type=view&id=201904012
[21]	JIANG X, WU B, YANG X K, et al. Multiple regulation of surface engineering for lithium-rich layered cathode materials via one-step strategy[J]. Electrochimica Acta, 2019, 325: 134951. http://www.sciencedirect.com/science/article/pii/S0013468619318225
[22]	LI J L, CAO C B, XU X Y, et al. LiNi_1/3Co_1/3Mn_1/3O₂ hollow nano-micro hierarchical microspheres with enhanced performances as cathodes for lithium-ion batteries[J]. Journal of Materials Chemistry A, 2013, 38(1): 11848. http://www.ingentaconnect.com/content/rsoc/20507488/2013/00000001/00000038/art00047
[23]	SCHIPPER F, DIXIT M, KOVACHEVA D, et al.Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi_0.6Co_0.2Mn_0.2O₂[J]. Journal of Materials Chemistry A, 2016, 4(41): 16073-16084. http://www.ingentaconnect.com/content/rsoc/20507488/2016/00000004/00000041/art00037
[24]	WU C, ZHU Y, DING M, et al. Fabrication of plate-like MnO₂ with excellent cycle stability for supercapacitor electrodes[J]. Electrochimica Acta, 2018, 291: 249-255. http://www.sciencedirect.com/science/article/pii/S001346861831898X

[1]	GENG Yajie, LI Jiaheng, MENG Xianjin, HE Ziguang, FANG Qiancheng. Research on GRA-TOPSIS evaluation model for slope stability of open pit mines based on variable weight theory[J]. Nonferrous Metals Science and Engineering, 2024, 15(4): 553-560. DOI: 10.13264/j.cnki.ysjskx.2024.04.010
[2]	WANG Jun’an, ZHONG Shengwen, YUE Bo, HUANG Xiaoli, CHEN Wei, WEI Xingquan, ZENG Min, LIU Jingjing, WEN Guanjun. Preparation technology and properties of modified single-crystalline LiNi_0.83Co_0.12Mn_0.05O₂ cathode materials by doping and coating[J]. Nonferrous Metals Science and Engineering, 2023, 14(6): 808-815. DOI: 10.13264/j.cnki.ysjskx.2023.06.008
[3]	LAI Fulin, WANG Yuqin, MA Quanxin, ZHOU Lingfei, YANG Mengqian, ZHONG Shengwen, Dmytro Sydorov. Preoxidation of Ni_0.8Co_0.17Al_0.03(OH)₂ with LiClO₄ to improve cycle stability of lithium-ion batteries[J]. Nonferrous Metals Science and Engineering, 2023, 14(1): 57-66. DOI: 10.13264/j.cnki.ysjskx.2023.01.008
[4]	HUANG Xiangyun, HE Lei, ZENG Liangliang, DU Chang, QU Pengpeng, ZHOU Toujun, YU Xiaoqiang, ZHONG Zhenchen, LI Jiajie. Effect of grain boundary diffusion Dy₆₀Co₃₅Ga₅ alloys on magnetic properties and thermal stability of sintered NdFeB magnets[J]. Nonferrous Metals Science and Engineering, 2019, 10(2): 104-109. DOI: 10.13264/j.cnki.ysjskx.2019.02.015
[5]	LIU Wenbing, LI Liang, LIU Guicheng, WANG Xindong. Research progress on stability of perovskite solar cells[J]. Nonferrous Metals Science and Engineering, 2017, 8(2): 31-42. DOI: 10.13264/j.cnki.ysjskx.2017.02.006
[6]	HUANG Yonggang, RAO Yunzhang, LI Yong. On line monitoring and evaluation of filling system stability[J]. Nonferrous Metals Science and Engineering, 2016, 7(4): 121-126. DOI: 10.13264/j.cnki.ysjskx.2016.04.021
[7]	RAO Yunzhang, ZHANG Xueyan. Based on logistic regression model to determine the weight fuzzy comprehensive evaluation method in the application of the slope stability analysis[J]. Nonferrous Metals Science and Engineering, 2015, 6(6): 111-115. DOI: 10.13264/j.cnki.ysjskx.2015.06.020
[8]	CHENG Qiuting, DENG Fei, CHEN Yanhong, XIA Yijiang, WANG Xiaojun. Numerical simulation analysis on the stability of mined-out area[J]. Nonferrous Metals Science and Engineering, 2015, (2): 85-88. DOI: 10.13264/j.cnki.ysjskx.2015.02.016
[9]	Lin Guohong. Stability classification of filling body's base plate based on ANSYS and GeoStudio coupling[J]. Nonferrous Metals Science and Engineering, 2014, 5(3): 91-95. DOI: 10.13264/j.cnki.ysjskx.2014.03.017
[10]	REN Jin_xia, HUANG Yun_qiang. Stability Analysis of Automatic Control System Using MATLAB[J]. Nonferrous Metals Science and Engineering, 2002, 16(3): 43-45.

Cited By

Cited by

Periodical cited type(1)

丁璨，王成豪，张露露，孙华斌，田浩博，刘骐诺. Mg-Ti共掺杂LiFePO_4电子结构及弹性性质的第一性原理计算. 稀有金属. 2025(03): 389-400 .

Other cited types(0)

Get Citation

PDF

XML

Article Metrics

Article views (153) PDF downloads (3) Cited by(1)

Li-rich manganese layered cathode materials doped with W

Abstract

References

Related Articles

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

Li-rich manganese layered cathode materials doped with W

Abstract

References

Related Articles

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Article Metrics

Related

Export File

Citation

Format

Content