column
Modulating microstructure and magnetic properties of sintered Nd-Fe-B magnets through Al-Ga element doping
ZHONG Minglong, ZHU Heping, ZHENG Yuanmin, DAI Feilong, LI Yuehai, JIANG Huixin, LIU Renhui
2026, 17(3): 327-334. DOI: 10.13264/j.cnki.ysjskx.2026.03.001
Abstract PDF
Process parameters for selective laser melting of Al-14Ce alloy
ZHU Yuzhen, YU Pingxiang, YAN Yi’nuo, QIU Hailin, YE Jieyun
2026, 17(3): 335-344. DOI: 10.13264/j.cnki.ysjskx.2026.03.002
Abstract PDF
Study on precipitation behavior and electromagnetic properties of magnetite crystals in modified molten copper slag
DONG Guozhou, DU Xueyan, WU Cuiling
2026, 17(3): 345-352. DOI: 10.13264/j.cnki.ysjskx.2026.03.003
Abstract PDF
Thermal analysis and reaction kinetics study of red mud and phosphogypsum mixed solid waste with added carbon and alkali
ZHANG Qinrui, JIN Huixin, WANG Meilong, LEI Ershuai, GU Wei, YAN Shuyi, HUANG Run
2026, 17(3): 353-363. DOI: 10.13264/j.cnki.ysjskx.2026.03.004
Abstract PDF
Thermal deformation behavior of the Cu-Sn alloy based on the modified Johnson-Cook constitutive model
LI Yang, CAI Jun, LI Qingyang, LI Chongchong, YU Yiwen, QIANG Fengming
2026, 17(3): 364-371. DOI: 10.13264/j.cnki.ysjskx.2026.03.005
Abstract PDF
Extraction and separation of manganese and cobalt from cobalt sulfide concentrate leaching solution after removal of impurities using P204
FENG Wei, TIAN Hao, LIANG Xiaolong, ZHANG Li
2026, 17(3): 372-377. DOI: 10.13264/j.cnki.ysjskx.2026.03.006
Abstract PDF
Study on the thermal crosslinking preparation of 3D binder and its lithium storage performance for silicon
YUAN Qionghua, XIAO Pengbo, LI Haozhen, CHEN Wenhao, ZHOU Fei, LIU Juan, DING Nengwen, LI Xiaocheng
2026, 17(3): 378-389. DOI: 10.13264/j.cnki.ysjskx.2026.03.007
Abstract PDF
Study on the influence of ammonium sulfate on the grain growth behavior in manganese electrodeposition
LI Shaokui, WANG Jiawei, WANG Haifeng, MA Xiaofeng, WEN Bin, QIAN Guibao
2026, 17(3): 390-397. DOI: 10.13264/j.cnki.ysjskx.2026.03.008
Abstract PDF
Modification of graphite anode with low-content micro-Si for enhanced rate capability
WANG Ziyan, MA Limei, YIN Yanhong
2026, 17(3): 398-409. DOI: 10.13264/j.cnki.ysjskx.2026.03.009
Abstract PDF
Investigation on microstructure and wear performance of Cu-Fe composite fabricated by accumulative roll bonding
SUN Dewen, LIU Jinping, WANG Yuxuan, XUAN Yu'ang, YE Senliang
2026, 17(3): 410-418. DOI: 10.13264/j.cnki.ysjskx.2026.03.010
Abstract PDF
Study on fatigue performance of steel under the influence of pitting corrosion
LU Changqing, HUANG Yongxin, ZHU Huazhong, LU Yi, NIE Biao, GUO Wenjie
2026, 17(3): 419-430. DOI: 10.13264/j.cnki.ysjskx.2026.03.011
Abstract PDF
Preparation of high-performance sodium-ion O3-type layered oxide cathode materials by Na3Zr2Si2PO12 composite with Na(Ni0.33Cu0.06Fe0.28Mn0.330.9Ti0.1O2
WU Yanjie, ZHENG Xudong, DING Chaoqun, LI Dong
2026, 17(3): 431-440. DOI: 10.13264/j.cnki.ysjskx.2026.03.012
Abstract PDF
Fabrication of D-MoS2@rGO-Ti3C2Tx/GCE Sensor for synchronous detection of trace Cd (Ⅱ) and Pb (Ⅱ)
PENG Ruhua, LIU Baixiong, SONG Caihua, ZUO Fuqiang, HE Xingyu
2026, 17(3): 441-456. DOI: 10.13264/j.cnki.ysjskx.2026.03.013
Abstract PDF
Study on the regulation of flotation desulfurization for high-sulfur bauxite
XU Xinyi, QIN Huifang, HUANG Guangjian, LU Yuqing, OU Yunling, LIU Daixin, CHEN Yuanlin
2026, 17(3): 457-465. DOI: 10.13264/j.cnki.ysjskx.2026.03.014
Abstract PDF
Preparation of high-performance geopolymer composites from lithium mica smelting slag
LUO Xianping, NIE Jiakai, LIU Zishuai, TANG Xuekun
2026, 17(3): 466-476. DOI: 10.13264/j.cnki.ysjskx.2026.03.015
Abstract PDF
MnFe2O4 composite catalytic material activated peroxymonosulfate to degrade acetaminophen
YAN Qun, LI Xincheng, ZHANG Lijun, XUE Wenhui, CHEN Yihao
2026, 17(3): 477-486. DOI: 10.13264/j.cnki.ysjskx.2026.03.016
Abstract PDF