column
Extraction and purification process of gallium
LIU Zuowei, XU Zhipeng, GUO Xueyi, TIAN Qinghua
2023, 14(6): 747-755. DOI: 10.13264/j.cnki.ysjskx.2023.06.001
Abstract PDF
Research progress in strengthening the heat transfer efficiency of magnesium smelting
GUO Junhua, DING Tianran, LI Peiyan, SUN Yixiang, LIU Jie, ZHONG Sujuan, ZHANG Ting’an
2023, 14(6): 756-763. DOI: 10.13264/j.cnki.ysjskx.2023.06.002
Abstract PDF
Numerical study on the thermochemical behavior evolution during dynamic batch weight conversion in a blast furnace
JI Langyong, FAN Haihan, WENG Lingyi, SU Zhongfang, CUI Jiaxin, E Dianyu
2023, 14(6): 764-772. DOI: 10.13264/j.cnki.ysjskx.2023.06.003
Abstract PDF
Study on the behavior of sodium, aluminum and silicon in the melting reduction of high-iron red mud
ZHU Zhongnan, LYU Guozhi, LI Xiaofei, JIANG Zhigang, ZHANG Ting’an
2023, 14(6): 773-780. DOI: 10.13264/j.cnki.ysjskx.2023.06.004
Abstract PDF
Research progress on the preparation of ultrafine copper powder by the polyol method
HE Junpeng, XU Yite, LI Xiaokai, WANG Keke, CAO Lei, XIONG Shixian
2023, 14(6): 781-790. DOI: 10.13264/j.cnki.ysjskx.2023.06.005
Abstract PDF
Status of technological research on the separation and recovery of valuable metal ions in cathode materials from spent lithium-ion battery
WANG Lu, FENG Tianyi, CUI Pengyuan, SHEN Qingfeng, LIN Yan, YU Xiaohua
2023, 14(6): 791-801. DOI: 10.13264/j.cnki.ysjskx.2023.06.006
Abstract PDF
Investigation of the surface tension of LiF-CaF2-Yb2O3 molten salt and Ni-Yb alloy
ZHANG Yongjian, CAI Boqing, WANG Xu, WANG Ruixiang, SHI Zhongning
2023, 14(6): 802-807. DOI: 10.13264/j.cnki.ysjskx.2023.06.007
Abstract PDF
Preparation technology and properties of modified single-crystalline LiNi0.83Co0.12Mn0.05O2 cathode materials by doping and coating
WANG Jun’an, ZHONG Shengwen, YUE Bo, HUANG Xiaoli, CHEN Wei, WEI Xingquan, ZENG Min, LIU Jingjing, WEN Guanjun
2023, 14(6): 808-815. DOI: 10.13264/j.cnki.ysjskx.2023.06.008
Abstract PDF
Research on the controlled rolling and controlled colling processes of steel for new MG700 high-strength anchor steel
ZHANG Hongxu, WANG Qikai, REN Zhifeng, PAN Lifang, LIU Guangming, WANG Min
2023, 14(6): 816-824. DOI: 10.13264/j.cnki.ysjskx.2023.06.009
Abstract PDF
Effect of hydride on the hydrogen storage performance of Mg2Ni based alloys
LIU Li, YANG Tianhui, ZHOU Xi, MENG Ranhao
2023, 14(6): 825-832. DOI: 10.13264/j.cnki.ysjskx.2023.06.010
Abstract PDF
Research on process parameters of CuSi3Mn alloy under upward continuous casting
HU Yujun, ZHANG Yinghui, AI Di, ZHANG Bing, KUANG Junping
2023, 14(6): 833-842. DOI: 10.13264/j.cnki.ysjskx.2023.06.011
Abstract PDF
Cause analysis and control of transverse defect in twin-roll casting aluminum alloy strip
ZHANG Kaibao, ZHANG Hongqiang, LI Binliang, DING Wanwu
2023, 14(6): 843-849. DOI: 10.13264/j.cnki.ysjskx.2023.06.012
Abstract PDF
Research progress on the microalloyed technology of TiAl-based alloys
ZHANG Hongwei
2023, 14(6): 850-861. DOI: 10.13264/j.cnki.ysjskx.2023.06.013
Abstract PDF
Study on the difference of Cr(Ⅵ) adsorption on {001} and {012} facets of hematite
LIAO Rong, LUO Caigui, GAO Qi, ZHONG Lixian, LUO Xianping
2023, 14(6): 862-870. DOI: 10.13264/j.cnki.ysjskx.2023.06.014
Abstract PDF
Research progress of carbon capture utilization and storage technology
XIE Bin, LU Dagui, WU Caibin
2023, 14(6): 871-878. DOI: 10.13264/j.cnki.ysjskx.2023.06.015
Abstract PDF
Analysis of the steady seepage lines for in-situ leaching mining in a rounded barefoot type mine
BAO Jianping, GUI Yong, LUO Sihai, WANG Guanshi
2023, 14(6): 879-886. DOI: 10.13264/j.cnki.ysjskx.2023.06.016
Abstract PDF
Orthogonal test of compound soil curing agents in ionic rare-earth heap leaching sites
CHEN Fei, ZHANG Shibin, XIE Yunzhong, WANG Junfeng
2023, 14(6): 887-894. DOI: 10.13264/j.cnki.ysjskx.2023.06.017
Abstract PDF
Research progress on the recovery of rare earth from waste rare earth polishing powder
JIANG Peng, QUE Lianghua, ZHOU Xun, LIAO Chunfa, LI Ahlin
2023, 14(6): 895-902. DOI: 10.13264/j.cnki.ysjskx.2023.06.018
Abstract PDF